CBM EC12 electronic regulator inlet probe with contact

FAN14124 à 28 Temperature probes for electronic control units Temperature probes are used for r eceiving the necessary information for the electronic control units operation. 106 106 EC11-EC14 EC12-EC15 66 54 60 106 Dimensions (mm) 164 EC13-EC16 EC17 Description Suitable Probe body Controlled liquid Protection for admissible temperature maximum temperature degree °C °C EC11 external probe EV0.. -40 ÷ 80 - IP55 EC12 contact delivery probe EV0.. -40 ÷ 80 120 IP55 EC13A immersion delivery probe EV0.. -40 ÷ 80 150 IP55 EC14 external probe EV.. -40 ÷ 80 - IP55 EC15 contact delivery probe EV.. -40 ÷ 80 120 IP55 EC16A immersion delivery probe EV.. -40 ÷ 80 150 IP55 EC17 well probe with tinned brass capsule EV.. -50 ÷ 110 120 - EC19 floor probe with nylon capsule EV.. -30 ÷ 85 100 - EC21 probe for solar panels EV40 -40 ÷ 280 280 - OPERATION The temperature probes are the detectors through which the control units receive the necessary information for their operation. The sensing element consists of NCT linearized thermistors, therefore no part is moving and isn’t subjected to mechanical wear. STANDARDS AND HOMOLOGATIONS In conformity with EN 60730-2-9 standard. INSTALLATION fastening centre EXTERNAL PROBES EC11-EC14 distance Install the external probe on the north or north-east side at the half-height of the building, away from protruding sections, windows, doors, ventilation grilles, etc. contact delivery probeS EC12-EC15 Install the contact probe on the water delivery pipe and downstream of the mixing delivery pipeline valve, to a minimum distance of 1,50 meters from the valve and possibly after a pipe elbow. The contact probe should be mounted by interposing the heat conducting paste between the surfaces involved, while making sure adherence is good. immersion delivery probeS EC13A-EC16A Screw the probe into the curve provided on the water delivery pipe, downstream of the mixing valve with a minimum distance of 1,5 meters. delivery pipeline FEATURES