Fantini Cosmi Higrostat Rel DIN 1 outlet L23EM1A 230V

L23EM1A Humidistat, DIN rail mounting For humidification or dehumidification systems with 1 outlet. 61 71 Dimensions (mm) 98 Sensor Num Power supply Measuring Resolution Measuring Degree of outputs range accuracy protection RH% RH% (0-100 RH%) L23EM1A probe (LS160A) 1 230 Vac 0 - 100 1 <± 0.7 IP40 back panel ELECTRICAL CHARACTERISTICS Output on single-pole relay in deviation. Contact rating 16(4)A 240 Vac. Power consumption 3W. REGULATIONS AND APPROVALS Compliant with EN60730-1, EN60730-2-9, EN55022 (CLASS B), EN50082-1. INSTALLATION DIN rail mounting. 16 OPERATION Type of control: can operate in ON/OFF or PID mode. ON/OFF control: in ON/OFF mode the output is ON or OFF depending on the input humidity, setpoint (1SP) and hysteresis value (1HY). The hysteresis indicates the amplitude of the deviation of the setpoint humidity to reactivate the output. PID control: in PID mode the output is ON for a fraction of cycle time 1CT. The cycle time characterises the dynamics of the system to be controlled and influences the accuracy of the control. Proportional control. Integrative proportional control. FEATURES Configurable parameters: „ dehumidification or humidification function by assigning positive or negative sign to the differential respectively. „ minimum or maximum setpoint limits. „ ON or OFF status of the output in the event of a defective probe. Operating temperature -10 to 50°C. Degree of protection IP40. ACCESSORIES LS160A RH% probe, scale range from 0 to 100 %RH L 17