CBM Pelet tipe 24-E-2.00
Pelet tipe 24-E-2.00
SKU 3G-CBM-03979
Juga terdaftar sebagai: FLU 30012 · FLU-30012
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
Pelet tipe 24-E-2.00
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CBM Pellet type 24-E-2.00 oil nozzle used for?
The CBM Pellet type 24-E-2.00 oil nozzle is used in industrial burners to atomize fuel oil for efficient combustion. It is commonly applied in boilers, furnaces, and heating systems where precise fuel metering is required. This nozzle is designed for pellet-type fuel delivery systems.
What are the specifications of the CBM Pellet type 24-E-2.00?
The CBM Pellet type 24-E-2.00 oil nozzle has a flow rate of 2.00 US gal/h at 100 psi (7 bar). It features a 24-E spray angle and is constructed from brass with a stainless steel orifice. The nozzle is designed for use with light fuel oils in industrial burner applications.
Where to buy the CBM Pellet type 24-E-2.00 in Singapore?
You can source the CBM Pellet type 24-E-2.00 oil nozzle through 3G Electric in Singapore. We supply this CBM nozzle and handle logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this item.
How to install the CBM Pellet type 24-E-2.00 oil nozzle?
To install the CBM Pellet type 24-E-2.00 oil nozzle, first ensure the burner is off and fuel line is depressurized. Remove the old nozzle and clean the adapter threads. Hand-tighten the new nozzle, then torque to manufacturer specifications. Always use a new gasket and check for leaks before restarting.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM oil, fuel & nozzles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- BUCHER HYDRAULICS Three-way cartridge valve cavity plug with zinc-coated steel body and Buna-N seal. Blocks ports 1, 2, and 3. Thread size 1-1/16''-12. Used to seal unused ports in hydraulic manifolds
- BUNTING BEARINGS This flanged sleeve bearing supports rotating shafts in industrial machinery, reducing friction and wear. It is used in applications such as conveyors, pumps, and gearboxes where radial and axial loads occur. The flange simplifies axial location in the housing. Made of bronze, it provides good wear resistance and conformability. Pack of 5
- BUCHER HYDRAULICS Zinc-coated steel cavity plug with Buna-N seal. Three-way design blocks ports 1, 2, and 3. Thread size 3/4''-16. Used to seal unused ports in hydraulic manifolds or valve blocks
- BUNTING BEARINGS This flanged sleeve bearing is made of bronze and has a 20 mm bore, 24 mm outer diameter, and 20 mm length. It is supplied in a pack of 5. Flanged sleeve bearings support rotating shafts and accommodate both radial and axial loads, with the flange simplifying mounting and preventing axial movement
- BUNTING BEARINGS This flanged sleeve bearing is made from SAE 841 bronze with embedded SAE 30 oil for self-lubrication. It has a 20 mm bore, 24 mm outer diameter, and 20 mm length. Suitable for general purpose industrial applications such as conveyors, packaging machinery, and agricultural equipment. Sold in a pack of 5
- BUNTING BEARINGS This flanged sleeve bearing is made from SAE 841 bronze with embedded SAE 30 oil for self-lubrication. It has a 12 mm bore, 18 mm OD, and 20 mm length. Suitable for low-speed, light-to-moderate load applications such as conveyors and packaging machinery. Sold in a pack of 5