CBM Ribbed fitting D4 F1/4
CBM RAC | Raccord cannele D4 F1/4
SKU 3G-CBM-05500
Juga terdaftar sebagai: RAC 15034 · RAC-15034
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM RAC | Raccord cannele D4 F1/4
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CBM ribbed fitting D4 F1/4 used for?
The CBM ribbed fitting D4 F1/4 is used in pneumatic and fluid handling systems to connect tubing with a 4 mm inner diameter to a 1/4 inch female threaded port. It is commonly applied in industrial automation, compressed air lines, and lubrication systems where secure, leak-free connections are required.
What are the specifications of the CBM ribbed fitting D4 F1/4?
The CBM ribbed fitting D4 F1/4 features a 4 mm hose barb connection and a 1/4 inch female BSP thread. It is designed for use with flexible nylon or polyurethane tubing in low-pressure pneumatic circuits. The fitting is made from brass or nickel-plated brass for corrosion resistance.
Where to buy the CBM ribbed fitting D4 F1/4 in Singapore?
You can source the CBM ribbed fitting D4 F1/4 from 3G Electric in Singapore. We supply genuine CBM pneumatic fittings and handle logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this SKU.
How to install the CBM ribbed fitting D4 F1/4?
To install the CBM ribbed fitting D4 F1/4, cut the tubing squarely and push it firmly onto the barb until fully seated. For the threaded end, apply PTFE tape to the male thread and tighten into the female port using a wrench. Avoid overtightening to prevent damage to the fitting or port.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM accessories & installation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with 14 mm and 10 mm bores. The aluminum hub and stainless steel bellows provide torsional rigidity while compensating for misalignment. Typical applications include connecting servo motors, encoders, and linear actuators in motion control systems
- RULAND MANUFACTURING This clamp-on bellows shaft coupling features 14 mm bores on both ends, a stainless steel bellows, and an aluminum hub. It is designed for precise shaft alignment and torque transmission in motion control applications such as automation and robotics
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING features a 14 mm bore on both ends, an aluminum hub, and a stainless steel bellows. It is designed for motion control applications requiring zero backlash and high torsional stiffness, such as connecting round shafts in automation and precision machinery
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two 4 mm round shafts, compensating for misalignment while transmitting torque. It is suitable for motion control applications such as precision positioning systems, encoders, and servo drives. The coupling features a stainless steel construction and a maximum speed of 10,000 RPM
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with bore diameters of 40 mm and 1 1/4 in. It is suited for motion-control applications requiring zero backlash and misalignment compensation, such as in packaging, robotics, and machine tools. The coupling is made of stainless steel and has a maximum speed of 10,000 RPM
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with 20 mm and 15 mm bore diameters. It features an aluminum hub and stainless steel bellows, compensating for misalignment in motion control systems such as precision positioning, encoders, and servo drives
