CBM Large radius elbow MF 90° 1/4"
CBM RAC | Courbe grand rayon MF 90° 1/4"
SKU 3G-CBM-05628
Juga terdaftar sebagai: RAC 52102 · RAC-52102
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM RAC | Courbe grand rayon MF 90° 1/4"
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CBM large radius elbow MF 90° 1/4" used for?
The CBM large radius elbow MF 90° 1/4" is a pipe fitting used in industrial piping systems to change flow direction by 90 degrees with a gentle curve. It is commonly applied in HVAC, refrigeration, and fluid transport where reduced pressure drop and smoother flow are required.
What are the specifications of the CBM large radius elbow MF 90° 1/4"?
The CBM large radius elbow MF 90° 1/4" is a male-female fitting with a 90-degree bend and a 1/4-inch nominal size. Its large radius design minimizes flow resistance. For exact dimensions and material specifications, refer to the product datasheet from CBM.
Where to buy the CBM large radius elbow MF 90° 1/4" in Singapore?
You can source the CBM large radius elbow MF 90° 1/4" through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this fitting.
How to install the CBM large radius elbow MF 90° 1/4"?
Install the CBM large radius elbow MF 90° 1/4" by ensuring pipe threads are clean and applying appropriate sealant. Tighten the male end into the female port using a wrench, avoiding over-torque. Always follow standard piping practices and check for leaks after installation.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM accessories & installation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING features a 30 mm bore diameter on one side and a 25 mm bore on the other, accommodating different shaft sizes. It is constructed from stainless steel and rated for a maximum speed of 10,000 RPM. The coupling is designed for precision torque transmission and shaft alignment in applications requiring zero backlash and high torsional stiffness
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with bore diameters of 1 3/4 in and 25 mm, accommodating inch-to-metric applications. It is constructed of stainless steel and rated for a maximum speed of 10,000 RPM. Typical uses include precision positioning, robotics, and servo-drive systems requiring zero backlash and high torsional stiffness
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with bore diameters of 35 mm and 25 mm. It is suitable for motion control applications requiring misalignment compensation and torque transmission, such as in precision positioning systems and servo drives. Maximum speed is 10,000 RPM
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with bore diameters of 45 mm and 25 mm. It is constructed from stainless steel and rated for a maximum speed of 10,000 RPM. The bellows design compensates for misalignment while transmitting torque in motion control, packaging, and automation equipment
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING connects two round shafts with bore diameters of 45 mm and 35 mm. It is constructed from stainless steel and supports a maximum speed of 10,000 RPM. The bellows design compensates for misalignment while providing high torsional stiffness, suitable for motion control and precision machinery applications
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two rotating shafts while compensating for misalignment. It features a 1-1/4 in bore on one side and a 25 mm bore on the other, accommodating inch-to-metric shaft sizes. With a maximum speed of 10,000 RPM, it is suitable for precision motion control applications requiring zero backlash and high torsional stiffness
