CBM Short radius elbow MF 90° 1/2"
CBM RAC | Courbe petit rayon MF 90° 1/2"
SKU 3G-CBM-05641
Juga terdaftar sebagai: RAC 52136 · RAC-52136
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM RAC | Courbe petit rayon MF 90° 1/2"
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a CBM short radius elbow MF 90° 1/2" used for?
This CBM fitting is used in piping systems to change flow direction by 90 degrees with a short radius, saving space in tight installations. It is commonly applied in industrial, HVAC, and refrigeration circuits where compact routing is required.
What are the specifications of the CBM short radius elbow MF 90° 1/2"?
The CBM short radius elbow MF 90° 1/2" is a male-female fitting with a 1/2-inch nominal size. It features a 90-degree bend with a short radius for compact layouts. For detailed pressure and temperature ratings, please contact 3G Electric.
Where to buy CBM short radius elbow MF 90° 1/2" in Singapore?
You can source the CBM short radius elbow MF 90° 1/2" through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this fitting.
How to install a CBM short radius elbow MF 90° 1/2"?
To install this CBM fitting, ensure threads are clean and apply appropriate sealant on the male end. Tighten to recommended torque without over-tightening to avoid damage. Always follow standard piping practices for leak-free connections.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM accessories & installation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING features a 30 mm bore diameter on one side and a 25 mm bore on the other, accommodating different shaft sizes. It is constructed from stainless steel and rated for a maximum speed of 10,000 RPM. The coupling is designed for precision torque transmission and shaft alignment in applications requiring zero backlash and high torsional stiffness
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with different bore diameters, 1-1/2 in and 30 mm, enabling inch-to-metric transitions. It is used in precision motion control applications such as servo motors and encoders, providing misalignment compensation and high torsional stiffness. Maximum speed is 10,000 RPM
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two rotating shafts while compensating for misalignment. It features a 1-3/4 in bore diameter 1 and a 30 mm bore diameter 2, with a maximum speed of 10,000 RPM. The stainless steel construction suits applications requiring zero backlash and high torsional stiffness, such as precision motion control and servo systems
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with different bore sizes (45 mm and 1-1/2 in). It accommodates misalignment while transmitting torque in motion-control systems such as servo motors and precision positioning equipment. Maximum speed is 10,000 RPM
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two round shafts with bore diameters of 35 mm and 25 mm. It is suitable for motion control applications requiring misalignment compensation and torque transmission, such as in precision positioning systems and servo drives. Maximum speed is 10,000 RPM
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING connects two round shafts with bore diameters of 45 mm and 35 mm. It is constructed from stainless steel and supports a maximum speed of 10,000 RPM. The bellows design compensates for misalignment while providing high torsional stiffness, suitable for motion control and precision machinery applications
