CBM Small radius bend MF 90° 3/4"
CBM RAC | Courbe petit rayon MF 90° 3/4"
SKU 3G-CBM-05643
Juga terdaftar sebagai: RAC 52140 · RAC-52140
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM RAC | Courbe petit rayon MF 90° 3/4"
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CBM small radius bend MF 90° 3/4" used for?
This CBM fitting is used in piping systems to change flow direction by 90 degrees with a tight radius, saving space in confined installations. It is commonly applied in industrial, commercial, and HVAC plumbing where compact routing is required.
What are the specifications of the CBM small radius bend MF 90° 3/4"?
The CBM small radius bend MF 90° 3/4" is a male-female fitting with a 3/4-inch nominal size and a 90-degree bend angle. Its compact radius design allows for tighter turns than standard bends. For exact pressure and temperature ratings, consult the manufacturer's datasheet.
Where to buy the CBM small radius bend MF 90° 3/4" in Singapore?
You can source the CBM small radius bend MF 90° 3/4" through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this fitting.
How to install the CBM small radius bend MF 90° 3/4"?
Install the CBM small radius bend by threading the male end into a compatible female port and tightening with a wrench. Apply thread sealant to prevent leaks. Ensure the bend orientation aligns with your piping layout before final tightening.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM accessories & installation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- RULAND MANUFACTURING This clamp-on beam shaft coupling accommodates up to 3° angular misalignment and connects two shafts with 1/4 in bore diameters. It has a round, inch-sized bore without a keyway, suitable for precision positioning and light-duty power transmission systems
- RULAND MANUFACTURING This general purpose clamp-on beam shaft coupling has a round body and inch dimensions. It features a 5/16 in bore diameter 1 and accommodates angular misalignment up to 3°. Suitable for connecting shafts in motion control and power transmission systems
- RULAND MANUFACTURING This general purpose clamp-on beam shaft coupling accommodates up to 3° angular misalignment. It features a round body, inch dimensions, and a 1/4 in bore diameter. The clamp-on attachment style secures the coupling to shafts. Suitable for motion control and light-duty power transmission applications
- RACO Iron surface mount clamp for 3/4 in trade size IMC and RMC conduit. Electroplated gray finish provides corrosion resistance. Screw-on mounting with 0.313 in hole diameter. Overall dimensions: 2-7/32 in length, 3/4 in width, 1-1/32 in height
- RULAND MANUFACTURING This general purpose clamp-on beam shaft coupling from RULAND MANUFACTURING connects two shafts with 3/16 in bore diameters. It accommodates up to 3° angular misalignment and features a round body style with no keyway. Suitable for motion control and light-duty power transmission applications
- RULAND MANUFACTURING Inch-sized, round beam coupling with 3/16 in bore diameter on both ends. Accommodates up to 3° angular misalignment, no keyway. Suitable for connecting shafts in motion control systems requiring zero backlash
