CBM Flange collar DN80 PN10/16
CBM RAC | Bride collerette DN80 PN10/16
SKU 3G-CBM-05722
Juga terdaftar sebagai: RAC 78210 · RAC-78210
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM RAC | Bride collerette DN80 PN10/16
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a CBM flange collar DN80 PN10/16 used for?
A CBM flange collar DN80 PN10/16 is used to connect pipes or valves in industrial piping systems, providing a secure, leak-resistant joint. It is commonly applied in water treatment, HVAC, and process industries where standardised flange dimensions are required.
What are the specifications of the CBM flange collar DN80 PN10/16?
The CBM flange collar DN80 PN10/16 has a nominal diameter of DN80 and is rated for PN10 and PN16 pressure classes. It is part of the CBM RAC series, designed for use with corresponding flanges and gaskets in low-to-medium pressure piping systems.
Where to buy a CBM flange collar DN80 PN10/16 in Singapore?
You can source the CBM flange collar DN80 PN10/16 through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your site, ensuring you receive genuine CBM fittings for your industrial piping needs.
How to install a CBM flange collar DN80 PN10/16?
To install a CBM flange collar DN80 PN10/16, align the collar with the mating flange, insert bolts, and tighten evenly in a cross pattern to the recommended torque. Use a suitable gasket between flanges and ensure pipe ends are clean and properly aligned before final tightening.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM accessories & installation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- RULAND MANUFACTURING Stainless steel clamp-on bellows shaft coupling with 40 mm and 30 mm bore diameters. Rated for maximum speed of 10,000 RPM. Used to connect two shafts of different diameters while compensating for misalignment in motion control systems
- RULAND MANUFACTURING This clamp-on bellows shaft coupling connects two rotating shafts while compensating for misalignment. It features a 40 mm bore diameter 1 and a 25 mm bore diameter 2, with a maximum speed of 10,000 RPM. The coupling is designed for metric shaft sizes and is used in precision motion control applications where zero backlash and high torsional stiffness are required
- RULAND MANUFACTURING Stainless steel clamp-on bellows coupling for connecting two 25 mm round shafts. Rated for 10,000 RPM maximum speed. Compensates for misalignment in motion control applications such as precision positioning systems, encoders, and servo drives
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING features a 30 mm bore diameter on one side and a 25 mm bore on the other, accommodating different shaft sizes. It is constructed from stainless steel and rated for a maximum speed of 10,000 RPM. The coupling is designed for precision torque transmission and shaft alignment in applications requiring zero backlash and high torsional stiffness
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING features 35 mm bores on both ends for connecting round shafts. It is constructed from stainless steel and rated for a maximum speed of 10,000 RPM. Bellows couplings are used in motion control applications to transmit torque while compensating for angular, parallel, and axial misalignment
- RULAND MANUFACTURING This clamp-on bellows shaft coupling from RULAND MANUFACTURING connects two rotating shafts while compensating for misalignment. It features a 35 mm bore diameter on one side and a 25 mm bore diameter on the other, with a maximum speed of 10,000 RPM. The coupling is designed for metric shaft sizes and is commonly used in precision motion control, servo systems, and encoder applications
