CBM Klingerite seal DN125
CBM RAC | Joint klingerite DN125
SKU 3G-CBM-05755
Juga terdaftar sebagai: RAC 90008 · RAC-90008
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Local availability & support — Indonesia
- Phone
- +65 8878 8355
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
CBM RAC | Joint klingerite DN125
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a Klingerite seal DN125 used for?
A Klingerite seal DN125 is a gasket used in industrial piping systems to create a leak-proof joint between flanges. It is commonly applied in steam, water, oil, and gas lines where reliable sealing under moderate pressure and temperature is required.
What are the specifications of the CBM Klingerite seal DN125?
The CBM Klingerite seal DN125 is a joint gasket designed for DN125 nominal pipe size. It is made from compressed asbestos-free fiber material suitable for general industrial sealing. Exact pressure and temperature ratings should be verified with the manufacturer.
Where to buy a Klingerite seal DN125 in Singapore?
You can source a Klingerite seal DN125 from 3G Electric in Singapore. We supply CBM industrial sealing products and handle logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this SKU.
How to install a Klingerite seal DN125 correctly?
To install a Klingerite seal DN125, ensure flange faces are clean and flat. Place the gasket centrally between flanges, then tighten bolts evenly in a cross pattern to the manufacturer's recommended torque. Avoid over-tightening, which can damage the gasket.
Digunakan dalam
Aplikasi umum untuk CBMCBM Produk
3G Electric memasok CBM accessories & installation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
Anda mungkin juga membutuhkan
Related products
- DDS This dual-lip oil seal features a rubber-enclosed case for use in rough bores. It is constructed with fluoro material and includes a spring-loaded sealing lip. The seal has a 64 mm inner diameter, 80 mm outer diameter, 8 mm width, and a maximum pressure rating of 10 psi. It is commonly used in rotating shaft applications such as industrial machinery, pumps, and gearboxes to retain lubricants and exclude contaminants
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bore applications. It has a fluoro material, two sealing lips with a spring, and a maximum pressure rating of 50 psi. Suitable for retaining lubricants and excluding contaminants in rotating shaft equipment such as pumps, gearboxes, and motors
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bore applications. It is constructed with a nitrile sealing element and includes a spring-loaded lip configuration. The seal has an inner diameter of 300 mm, outer diameter of 340 mm, and width of 20 mm. It is commonly used in rotating shaft sealing applications such as gearboxes and pumps to prevent lubricant leakage and contaminant ingress
- DDS This dual-lip oil seal features a rubber-enclosed case designed for mounting in rough bores. It has a 34 mm inner diameter, 54 mm outer diameter, and 11 mm width, with a TCN-type nitrile sealing element and spring-loaded lips. Typical applications include retaining lubricants and excluding contaminants in rotating shafts of industrial gearboxes, pumps, and motors
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores, providing effective sealing in rotating shaft applications. With a 26 mm inner diameter, 40 mm outer diameter, and 6 mm width, it is suitable for metric shaft dimensions. The TCN-type fluoro material and spring-loaded lips handle pressures up to 50 psi, preventing lubricant leakage and contaminant ingress in industrial gearboxes, pumps, and motors
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores. It has a TCN design with a spring-loaded lip, made of Fluoro material. The seal measures 240 mm inner diameter, 270 mm outer diameter, and 8.5 mm width. It is used in rotating equipment such as industrial gearboxes and pumps to prevent lubricant leakage and contaminant ingress
