CURT Brake Control Harness: Pre-Wired, 24 in Overall Lg, 1 in Overall Wd, 1 in Ht (MPN 51333)
The CURT Brake Control Harness (MPN 51333) is a pre-wired fleet and vehicle maintenance component measuring 24 inches overall length, 1 inch width, and 1 inch height. 3G Electric interprets customer demand and…
SKU 3G-OTH-481015
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The CURT Brake Control Harness (MPN 51333) is a pre-wired fleet and vehicle maintenance component measuring 24 inches overall length, 1 inch width, and 1 inch height. 3G Electric interprets customer demand and delivers this genuine CURT harness across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CURT Brake Control Harness used for?
The CURT Brake Control Harness (MPN 51333) is a pre-wired component used in fleet and vehicle maintenance to connect a brake controller to a trailer's electrical system. It simplifies installation by providing a ready-to-use wiring interface, ensuring reliable brake signal transmission for towing applications.
What are the specifications of the CURT Brake Control Harness?
The CURT Brake Control Harness (MPN 51333) has an overall length of 24 in, width of 1 in, and height of 1 in. It is a pre-wired harness designed for fleet and vehicle maintenance, manufactured by CURT. 3G Electric supplies this genuine CURT part across 14 industrial departments.
Where to buy the CURT Brake Control Harness worldwide?
3G Electric supplies the genuine CURT Brake Control Harness (MPN 51333) worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this pre-wired harness for your fleet maintenance needs.
How to install the CURT Brake Control Harness?
To install the CURT Brake Control Harness (MPN 51333), first disconnect the vehicle battery. Locate the vehicle's pre-wired brake controller connector, typically under the dashboard. Plug the harness into that connector, then route the 24 in cable to the trailer connector. Secure with zip ties and test brake function before towing.
Digunakan dalam
Aplikasi umum untuk CURTCURT Produk
3G Electric memasok CURT fleet and vehicle maintenance. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
