Dayton Hand Chain: Manual Chain Hoists, 4,000 lb Compatible Load Capacity, Dayton
The DAYTON Hand Chain is a replacement hand chain designed for use with Dayton manual chain hoists. This product, manufacturer part number GGS_56971, is compatible with a 4,000 lb load capacity hoist. It is a direct…
SKU 3G-OTH-329680
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Hand Chain is a replacement hand chain designed for use with Dayton manual chain hoists. This product, manufacturer part number GGS_56971, is compatible with a 4,000 lb load capacity hoist. It is a direct replacement component for maintaining the operation of Dayton manual chain hoists.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Hand Chain GGS_56971 used for?
The DAYTON Hand Chain GGS_56971 is a replacement hand chain for Dayton manual chain hoists. It is used to raise or lower loads by pulling the chain, enabling precise load positioning in industrial maintenance, manufacturing, and warehousing applications where overhead lifting is required.
What are the specifications of the DAYTON Hand Chain GGS_56971?
The DAYTON Hand Chain GGS_56971 is a hand chain designed for manual chain hoists. It is compatible with the Dayton series and supports a load capacity of 4,000 lb. The manufacturer part number is GGS_56971, and it serves as a direct replacement component for Dayton manual hoists.
Where to buy the DAYTON Hand Chain GGS_56971 worldwide?
You can source the DAYTON Hand Chain GGS_56971 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the replacement chain reaches your facility for hoist maintenance.
How to install the DAYTON Hand Chain GGS_56971 on a manual hoist?
To install the DAYTON Hand Chain GGS_56971, first ensure the hoist is unloaded and secured. Remove the old hand chain from the hoist's hand chain wheel, then route the new chain over the wheel, engaging the links properly. Connect the chain ends and verify smooth operation before use.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton hand chains for hoists. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
