Dayton Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 1/4 in Bore Dia
The DAYTON Shaft Collar (MPN 1F594) is a 2-piece, inch, round, clamp-on plastic shaft collar with a 1/4 in bore diameter and a 5/8 in outside diameter. 3G Electric interprets customer demand and delivers this genuine…
SKU 3G-OTH-126307
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Shaft Collar (MPN 1F594) is a 2-piece, inch, round, clamp-on plastic shaft collar with a 1/4 in bore diameter and a 5/8 in outside diameter. 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments — and far more — with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Frequently Asked Questions
What is the DAYTON 1F594 shaft collar used for?
The DAYTON 1F594 is a 2-piece, clamp-on plastic shaft collar used to position, secure, or limit axial movement on a 1/4-inch shaft. It is commonly applied in light-duty industrial machinery, conveyors, and packaging equipment where corrosion resistance and non-marring properties are needed.
What are the specifications of the DAYTON 1F594 shaft collar?
The DAYTON 1F594 is an inch, round, clamp-on plastic shaft collar with a 1/4-inch bore diameter and a 5/8-inch collar outside diameter. It is a 2-piece design for easy installation and adjustment without damaging the shaft. The manufacturer part number is 1F594.
Where to buy the DAYTON 1F594 shaft collar worldwide?
3G Electric supplies the DAYTON 1F594 shaft collar worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this plastic shaft collar.
How to install a DAYTON 2-piece clamp-on shaft collar?
To install the DAYTON 1F594, place the two halves around the shaft at the desired position, then tighten the screws evenly using a hex key. Avoid over-tightening to prevent damage to the plastic collar. Always verify alignment before final tightening to ensure secure axial positioning.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton plastic shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
