Dayton Shaft Collar: 2-Piece, Inch, Round, Clamp-On, 2 in Bore Dia, 3 in Collar Outside Dia
The DAYTON Shaft Collar (MPN 1L729) is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 2 in bore diameter and 3 in outside diameter, constructed from 304 stainless steel. 3G Electric sources this…
SKU 3G-OTH-132823
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Shaft Collar (MPN 1L729) is a 2-piece, inch, round, clamp-on stainless steel shaft collar with a 2 in bore diameter and 3 in outside diameter, constructed from 304 stainless steel. 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in combustion, pumps, and controls ensuring accurate specification and supply.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON 1L729 shaft collar used for?
The DAYTON 1L729 is a 2-piece, clamp-on shaft collar used to position, secure, or limit axial movement on a shaft. It is commonly applied in conveyor systems, packaging machinery, and industrial equipment where precise component location is required.
What are the specifications of the DAYTON 1L729 shaft collar?
The DAYTON 1L729 is a 2-piece, round, clamp-on shaft collar with a 2-inch bore diameter and a 3-inch outside diameter. It is made of 304 stainless steel and uses inch dimensions. The manufacturer part number is 1L729.
Where to buy the DAYTON 1L729 shaft collar worldwide?
You can source the DAYTON 1L729 shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install a DAYTON 1L729 clamp-on shaft collar?
To install the DAYTON 1L729, loosen the two socket-head cap screws, slide the collar onto the shaft at the desired position, then tighten the screws evenly to clamp the collar securely. Use a torque wrench to avoid over-tightening and damaging the shaft or collar.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton stainless steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
