Dayton Impeller: For Straight Centrifugal Pumps, Mfr Part PP18004CG
The DAYTON Impeller (SKU 23AT86) is a cast-iron impeller designed for straight centrifugal pumps. It is compatible with Dayton pumps, specifically the Grainger part number 4UA78A and manufacturer model number 12N810…
SKU 3G-OTH-95126
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Impeller (SKU 23AT86) is a cast-iron impeller designed for straight centrifugal pumps. It is compatible with Dayton pumps, specifically the Grainger part number 4UA78A and manufacturer model number 12N810. The manufacturer part number is PP18004CG.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Impeller PP18004CG used for?
The DAYTON Impeller PP18004CG is a cast-iron replacement impeller designed for straight centrifugal pumps. It is commonly used in industrial fluid handling applications where reliable water or light slurry transfer is required, such as in HVAC systems, irrigation, and process pumping.
What are the specifications of the DAYTON Impeller PP18004CG?
The DAYTON Impeller PP18004CG is made of cast iron and is compatible with Dayton straight centrifugal pumps, specifically Grainger part number 4UA78A and manufacturer model number 12N810. Its manufacturer part number is PP18004CG, and it is designed as a direct replacement for those pump models.
Where to buy the DAYTON Impeller PP18004CG worldwide?
You can source the DAYTON Impeller PP18004CG through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the impeller reaches your facility regardless of location.
How to install the DAYTON Impeller PP18004CG?
To install the DAYTON Impeller PP18004CG, first disconnect pump power and drain the system. Remove the pump casing, then replace the old impeller with the new cast-iron unit, ensuring proper alignment on the shaft. Reassemble the casing, check for free rotation, and test for leaks before returning to service.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton impellers for self-priming centrifugal pumps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
