Dayton Nitrile Replacement Impeller/Sleeve Assembly: Mfr Part # 3ACD1, Buna-N
The DAYTON Nitrile Replacement Impeller/Sleeve Assembly (Mfr Part # 3ACD1) is a Buna-N impeller/sleeve assembly designed for dewatering and wastewater pumps. This replacement component is manufactured by Dayton and…
SKU 3G-OTH-86070
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Nitrile Replacement Impeller/Sleeve Assembly (Mfr Part # 3ACD1) is a Buna-N impeller/sleeve assembly designed for dewatering and wastewater pumps. This replacement component is manufactured by Dayton and is constructed from Buna-N material.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Nitrile Replacement Impeller/Sleeve Assembly used for?
The DAYTON Nitrile Replacement Impeller/Sleeve Assembly (Mfr Part # 3ACD1) is used in dewatering and wastewater pumps to move water and sludge. Its Buna-N construction provides resistance to oils, fuels, and moderate chemicals, making it suitable for industrial sump and construction-site dewatering applications.
What are the specifications of the DAYTON 3ACD1 impeller/sleeve assembly?
The DAYTON 3ACD1 is a Buna-N (nitrile) impeller/sleeve assembly. Key specifications include material: Buna-N, product type: Impeller/Sleeve Assembly, and manufacturer part number: 3ACD1. It is designed as a replacement component for Dayton dewatering and wastewater pumps.
Where to buy the DAYTON 3ACD1 impeller/sleeve assembly worldwide?
You can source the DAYTON 3ACD1 impeller/sleeve assembly worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact 3G Electric for availability and lead time.
How to install the DAYTON 3ACD1 impeller/sleeve assembly?
To install the DAYTON 3ACD1 impeller/sleeve assembly, first disconnect pump power and drain fluids. Remove the pump housing, then replace the old assembly with the new Buna-N unit, ensuring proper alignment. Reassemble the housing, check for smooth rotation, and test for leaks before returning to service.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton impellers for dewatering & wastewater pumps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
