Dayton Replacement Impeller/Sleeve Assembly: Mfr Part # 3ACE1, Neoprene
The DAYTON Replacement Impeller/Sleeve Assembly (Mfr Part # 3ACE1) is a neoprene impeller designed for dewatering and wastewater pumps. This assembly is manufactured by Dayton and is intended as a replacement…
SKU 3G-OTH-86203
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Replacement Impeller/Sleeve Assembly (Mfr Part # 3ACE1) is a neoprene impeller designed for dewatering and wastewater pumps. This assembly is manufactured by Dayton and is intended as a replacement component for compatible pump systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Replacement Impeller/Sleeve Assembly 3ACE1 used for?
The DAYTON Replacement Impeller/Sleeve Assembly 3ACE1 is used as a replacement component in dewatering and wastewater pumps. Its neoprene construction provides flexibility and wear resistance, making it suitable for moving water and sludge in industrial, construction, and municipal applications.
What are the specifications of the DAYTON 3ACE1 impeller/sleeve assembly?
The DAYTON 3ACE1 impeller/sleeve assembly is made of neoprene material. It is classified as an impeller/sleeve assembly and carries the manufacturer part number 3ACE1. This Dayton component is designed specifically for dewatering and wastewater pump systems.
Where to buy the DAYTON 3ACE1 impeller/sleeve assembly worldwide?
You can source the DAYTON 3ACE1 impeller/sleeve assembly through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the component reaches your facility reliably.
How to install the DAYTON 3ACE1 impeller/sleeve assembly?
To install the DAYTON 3ACE1 impeller/sleeve assembly, first disconnect pump power and drain fluids. Remove the pump housing, then replace the old assembly with the new Dayton neoprene unit, ensuring proper alignment. Reassemble the housing and test for leaks before returning to service.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton impellers for dewatering & wastewater pumps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
