DAYTON 2 Bolt Flange Bearing: Radial Ball, 5/8 in Bore, Cast Iron, Set Screws
The DAYTON 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 5/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, a rhombus flange shape, and a…
SKU 3G-OTH-109357
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 5/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, a rhombus flange shape, and a 3 7/8 in length. The bearing is lubricated with NLGI #2 equivalent grease and uses a 3/8 in mounting bolt size. This inch-system, non-split housing unit is identified by manufacturer part number 3FCN3.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON 2 Bolt Flange Bearing used for?
The DAYTON 2 Bolt Flange Bearing is used to support rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set-screw mounting provide secure shaft attachment in moderate-load applications.
What are the specifications of the DAYTON 2 Bolt Flange Bearing?
This DAYTON bearing has a 5/8 in cylindrical bore, a cast iron rhombus flange, and a 3 7/8 in length. It uses NLGI #2 equivalent grease, a 3/8 in mounting bolt, and set screws for shaft mounting. The inch-system unit is non-split and carries MPN 3FCN3.
Where to buy the DAYTON 2 Bolt Flange Bearing worldwide?
3G Electric supplies the DAYTON 2 Bolt Flange Bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this bearing for your application.
How to install the DAYTON 2 Bolt Flange Bearing?
To install, clean the shaft and bearing bore, then slide the bearing onto the shaft. Tighten the set screws evenly against the shaft using a hex key. Secure the flange to the mounting surface with 3/8 in bolts. Lubricate per NLGI #2 grease recommendations.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
