Dayton Pillow Block Bearing: 1 7/16 in Bore, Cast Iron, Set Screws
The DAYTON Pillow Block Bearing (SKU 3FCR1) is a general purpose pillow block ball bearing with a 1 7/16 in bore. It features a cast iron housing, set screw locking, and a 1 7/8 in shaft height. The mounting bolt…
SKU 3G-OTH-105429
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Pillow Block Bearing (SKU 3FCR1) is a general purpose pillow block ball bearing with a 1 7/16 in bore. It features a cast iron housing, set screw locking, and a 1 7/8 in shaft height. The mounting bolt size is 1/2 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Pillow Block Bearing 3FCR1 used for?
The DAYTON Pillow Block Bearing 3FCR1 is a general purpose ball bearing used to support rotating shafts in industrial machinery. It is commonly applied in conveyors, fans, and material handling equipment where a 1 7/16 in bore and cast iron housing provide reliable radial load support.
What are the specifications of the DAYTON Pillow Block Bearing 3FCR1?
The DAYTON Pillow Block Bearing 3FCR1 has a 1 7/16 in bore, cast iron housing with set screw locking, and a 1 7/8 in shaft height. The mounting bolt size is 1/2 in, and the system of measurement is inch. The manufacturer part number is 3FCR1.
Where to buy the DAYTON Pillow Block Bearing 3FCR1 worldwide?
You can source the DAYTON Pillow Block Bearing 3FCR1 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the bearing reaches your facility efficiently.
How to install the DAYTON Pillow Block Bearing 3FCR1?
To install the DAYTON Pillow Block Bearing 3FCR1, first ensure the shaft is clean and the bore is aligned. Tighten the set screws evenly to lock the bearing onto the shaft, then secure the housing to the mounting surface using 1/2 in bolts. Follow standard pillow block installation practices for proper alignment.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
