DAYTON 2 Bolt Flange Bearing: Radial Ball, 1 1/8 in Bore, Cast Iron, Set Screws
The DAYTON 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 1 1/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent…
SKU 3G-OTH-107207
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 1 1/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent lubricant, and has a 7/16 in mounting bolt size. This inch-system bearing is not split and has a 5 9/16 in length.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON 2 Bolt Flange Bearing used for?
The DAYTON 2 Bolt Flange Bearing is used in general purpose industrial applications to support rotating shafts and reduce friction. It is commonly found on conveyors, fans, and material handling equipment where a compact, two-bolt mounting pattern is required.
What are the specifications of the DAYTON 2 Bolt Flange Bearing 3FCV4?
The DAYTON 2 Bolt Flange Bearing (MPN 3FCV4) has a 1 1/8 in cylindrical bore, cast iron housing, set screw shaft locking, and NLGI #2 equivalent lubricant. It uses a 7/16 in mounting bolt, is not split, and measures 5 9/16 in length. System of measurement is inch.
Where to buy the DAYTON 2 Bolt Flange Bearing worldwide?
You can source the DAYTON 2 Bolt Flange Bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install the DAYTON 2 Bolt Flange Bearing?
To install, first clean the shaft and apply a light oil film. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 7/16 in bolts evenly. Then tighten the set screws against the shaft using the recommended torque. Ensure the housing is not split.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
