DAYTON 2 Bolt Flange Bearing: Radial Ball, 3/4 in Bore, Cast Iron, Set Screws
The DAYTON 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 3/4 in cylindrical bore and a cast iron housing. It features set screws, a 4 13/32 in length, and is lubricated with NLGI…
SKU 3G-OTH-118986
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 3/4 in cylindrical bore and a cast iron housing. It features set screws, a 4 13/32 in length, and is lubricated with NLGI #2 equivalent grease. The bearing uses a 3/8 in mounting bolt, is not split, and is measured in inches (MPN 3FDE1).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON 2 Bolt Flange Bearing used for?
The DAYTON 2 Bolt Flange Bearing is a general purpose radial ball bearing used to support rotating shafts in industrial machinery. Its cast iron housing and set screws provide secure mounting in applications like conveyors, fans, and material handling equipment where a compact, flange-mount design is needed.
What are the specifications of the DAYTON 2 Bolt Flange Bearing?
The DAYTON 2 Bolt Flange Bearing (MPN 3FDE1) has a 3/4 in cylindrical bore, a cast iron housing with set screws, and a 4 13/32 in length. It uses NLGI #2 equivalent grease, a 3/8 in mounting bolt, and is not split. The bearing material is 52100 steel, inch system.
Where to buy the DAYTON 2 Bolt Flange Bearing worldwide?
3G Electric supplies the DAYTON 2 Bolt Flange Bearing (MPN 3FDE1) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this general purpose flange-mount bearing.
How to install a DAYTON 2 Bolt Flange Bearing?
To install the DAYTON 2 Bolt Flange Bearing, first ensure the shaft is clean and the 3/4 in bore aligns properly. Tighten the set screws onto the shaft using a hex key, then secure the cast iron housing to the mounting surface with 3/8 in bolts. Apply moderate torque to avoid housing distortion.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
