Dayton Shaft Collar: 2-Piece, Inch, Round, 1 7/16 in Bore Dia, 2 1/4 in Collar Outside Dia
The DAYTON Shaft Collar (MPN 3ZN72) is a 2-piece steel shaft collar, inch, round, made from 1045 steel. It features a 1 7/16 in bore diameter and a 2 1/4 in collar outside diameter. 3G Electric interprets demand for…
SKU 3G-OTH-160208
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Shaft Collar (MPN 3ZN72) is a 2-piece steel shaft collar, inch, round, made from 1045 steel. It features a 1 7/16 in bore diameter and a 2 1/4 in collar outside diameter. 3G Electric interprets demand for this genuine industrial component and can source, quote, and support it across our 14 departments, with specialist depth in power transmission.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a DAYTON 2-piece shaft collar used for?
A DAYTON 2-piece shaft collar is used to position, secure, or limit components on a shaft in industrial machinery. It is commonly applied in conveyors, packaging equipment, and power transmission systems to prevent axial movement and maintain alignment.
What are the specifications of the DAYTON 3ZN72 shaft collar?
The DAYTON 3ZN72 is a 2-piece, inch, round steel shaft collar with a 1 7/16 in bore diameter and a 2 1/4 in collar outside diameter. It is made from 1045 steel and is designed for secure clamping on shafts without marring the surface.
Where to buy the DAYTON 3ZN72 shaft collar worldwide?
You can source the DAYTON 3ZN72 shaft collar worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location, ensuring a smooth procurement process for this component.
How to install a 2-piece shaft collar?
To install a 2-piece shaft collar, separate the two halves, place them around the shaft at the desired position, then tighten the screws evenly to clamp the collar securely. Ensure the bore aligns with the shaft diameter and avoid over-tightening to prevent damage to the shaft or collar.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
