Dayton Shallow Well Jet Pump System: 1/2 hp HP, Single Phase, 115/230V AC
The DAYTON Shallow Well Jet Pump System (SKU 4HFA2) is a 1/2 hp HP, single-phase shallow-well jet pump system. It operates at a rated voltage of 115/230V AC and does not include an ejector. This product is designed…
SKU 3G-OTH-97165
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Shallow Well Jet Pump System (SKU 4HFA2) is a 1/2 hp HP, single-phase shallow-well jet pump system. It operates at a rated voltage of 115/230V AC and does not include an ejector. This product is designed for use in shallow well applications where a separate ejector is required.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Shallow Well Jet Pump System 4HFA2 used for?
The DAYTON Shallow Well Jet Pump System 4HFA2 is used for pumping water from shallow wells in residential or light commercial applications. It requires a separate ejector to operate and is suitable for wells where the water level is within approximately 25 feet of the pump.
What are the specifications of the DAYTON 4HFA2 shallow well jet pump?
The DAYTON 4HFA2 is a 1/2 hp, single-phase shallow-well jet pump system with a rated voltage of 115/230V AC. It does not include an ejector. The manufacturer part number is 4HFA2. This pump is designed for use with a separately purchased ejector for shallow well applications.
Where to buy the DAYTON 4HFA2 shallow well jet pump worldwide?
You can source the DAYTON 4HFA2 shallow well jet pump through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead time on this pump system.
How to install the DAYTON 4HFA2 shallow well jet pump?
Install the DAYTON 4HFA2 by mounting it on a stable base near the well. Connect suction and discharge piping, ensuring a separate ejector is installed per the manufacturer's instructions. Wire the pump for 115V or 230V AC as per local codes. Prime the pump before starting.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton shallow-well jet pump systems. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.














