Dayton Pillow Block Bearing: 5/8 in Bore, Zinc Die Cast, Set Screws, 1 1/8 in Shaft Ht
The DAYTON 4X724 is a general purpose pillow block ball bearing with a 5/8 in bore, designed for inch-system applications. It features a zinc die-cast housing with set screws and a 1 1/8 in shaft height, supporting a…
SKU 3G-OTH-108349
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON 4X724 is a general purpose pillow block ball bearing with a 5/8 in bore, designed for inch-system applications. It features a zinc die-cast housing with set screws and a 1 1/8 in shaft height, supporting a maximum speed of 5,000 RPM and a mounting bolt size of 3/8 in.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON 4X724 pillow block bearing used for?
The DAYTON 4X724 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its zinc die-cast housing and set-screw locking design suit light-to-moderate loads in inch-system applications.
What are the specifications of the DAYTON 4X724 pillow block bearing?
The DAYTON 4X724 has a 5/8 in bore, 1 1/8 in shaft height, and a maximum speed of 5,000 RPM. It uses a 3/8 in mounting bolt and features a zinc die-cast housing with set screws. This inch-system bearing is designed for general purpose use.
Where to buy the DAYTON 4X724 pillow block bearing worldwide?
3G Electric supplies the DAYTON 4X724 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this bearing for your application.
How to install the DAYTON 4X724 pillow block bearing?
Mount the DAYTON 4X724 on a clean, flat surface using 3/8 in bolts. Align the shaft through the bore, then tighten the set screws evenly against the shaft. Ensure the housing is not distorted and the shaft rotates freely. Follow standard bearing installation practices for best results.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
