Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Dayton Parallel Shaft AC Gearmotor - Parallel Shaft AC Gearmotors
DaytonParallel Shaft AC Gearmotors

Dayton Parallel Shaft AC Gearmotor

DAYTON AC Gearmotor: Parallel adalah motor roda gigi poros paralel yang dirancang untuk aplikasi industri yang membutuhkan torsi tinggi pada kecepatan rendah. Dengan spesifikasi Single Output Shaft, Split-Phase…

SKU 3G-OTH-118208

Merek
Dayton
Item
Parallel Shaft AC Gearmotor
Kategori
Parallel Shaft AC Gearmotors
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Spesifikasi Teknis

Dayton
Type
Single Output Shaft, Split-Phase, TEFC, 14 RPM, 200 in-lb Max Torque
Done
Nameplate speed describes the revolutions per minute (RPM) of a gearmotor output shaft.
UNSPSC
26101602
Gear Ratio
118:1
Mfr. Model
2Z817
Bearing Type
Ball on Motor; Heavy Duty Needle Roller and Thrust Balls on
Keyway Depth
1
Keyway Width
3/16
Overall Width
5.13
Overall Height
3.38
Input Horsepower
0.067
Full Load Current
1.5
Length Less Shaft
9.88
Output Shaft Length
1-1/2
Output Shaft Diameter
5/8
Overhung Load Capacity
175
Mount Hole Center-to-Center Length
1.5

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

Dayton Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

DAYTON AC Gearmotor: Parallel adalah motor roda gigi poros paralel yang dirancang untuk aplikasi industri yang membutuhkan torsi tinggi pada kecepatan rendah. Dengan spesifikasi Single Output Shaft, Split-Phase, TEFC, 14 RPM, dan torsi maksimal 200 in-lb, motor ini cocok untuk berbagai peralatan pabrik. DAYTON AC Gearmotor: Parallel memiliki arus beban penuh 1,5 A dan tidak dilengkapi inverter. Cari motor roda gigi industri? DAYTON AC Gearmotor: Parallel adalah pilihan yang tepat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi DAYTON AC Gearmotor: Parallel?

DAYTON AC Gearmotor: Parallel memiliki spesifikasi: Single Output Shaft, Split-Phase, TEFC, 14 RPM, torsi maksimal 200 in-lb, arus beban penuh 1,5 A, dan tidak inverter rated. Nomor bagian pabrikan adalah 2Z817.

Untuk apa DAYTON AC Gearmotor: Parallel digunakan?

DAYTON AC Gearmotor: Parallel digunakan untuk aplikasi industri yang memerlukan putaran rendah (14 RPM) dengan torsi tinggi (200 in-lb), seperti konveyor, pengaduk, atau peralatan pabrik lainnya. Motor ini bertipe TEFC (Totally Enclosed Fan Cooled) sehingga cocok untuk lingkungan berdebu atau kotor.

Di mana beli DAYTON AC Gearmotor: Parallel di Indonesia?

Anda dapat membeli DAYTON AC Gearmotor: Parallel melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Apakah DAYTON AC Gearmotor: Parallel inverter rated?

Tidak, DAYTON AC Gearmotor: Parallel tidak inverter rated. Motor ini dirancang untuk operasi kecepatan tetap pada 14 RPM dengan torsi maksimal 200 in-lb. Jika Anda memerlukan kontrol kecepatan variabel, pertimbangkan motor inverter rated.

Digunakan dalam

Aplikasi umum untuk Dayton
HVAC ventilation — DAYTON centrifugal upblast roof exhaust fans (SKU 7M7U3) for kitchen exhaust systems
Mechanical power transmission — DAYTON HTD timing pulleys (SKU 404GV0) for conveyor belt drives
Process water handling — DAYTON self-priming centrifugal pumps (SKU 2ZXT4) for dewatering or transfer
Roofing and building services — DAYTON fixed ventilated roof curbs (SKU 4HX59) for filtered supply fan installations
Material handling — DAYTON latch assemblies (SKU 2KEN4) for electric chain hoist hook safety
Industrial air movement — DAYTON downblast roof exhaust fans (SKU 3HFL9) for clean air exhaust in manufacturing plants
Not sure this is the right part? Photo-identify it→

Dayton Produk

3G Electric memasok Dayton parallel shaft ac gearmotors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 68 RPM with a maximum torque of 55 in-lb and draws 1.5 A full load current. Not inverter rated. Suitable for low-speed, moderate-torque applications such as conveyors and packaging machinery
Dayton
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 68 RPM with a maximum torque of 55 in-lb and draws 1.5 A full load current. Not inverter rated. Suitable for low-speed, moderate-torque applications such as conveyors and packaging machinery
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 287 RPM with a maximum torque of 70 in-lb and draws 6.0 A at full load. Not inverter rated. Suitable for moderate-speed, high-torque applications such as conveyors, packaging machinery, and material handling systems
Dayton
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 287 RPM with a maximum torque of 70 in-lb and draws 6.0 A at full load. Not inverter rated. Suitable for moderate-speed, high-torque applications such as conveyors, packaging machinery, and material handling systems
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 89 RPM with a maximum torque of 220 in-lb and a full load current of 6.0 A. Not inverter rated. Suitable for applications requiring moderate speed and high torque, such as conveyors and packaging machinery
Dayton
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 89 RPM with a maximum torque of 220 in-lb and a full load current of 6.0 A. Not inverter rated. Suitable for applications requiring moderate speed and high torque, such as conveyors and packaging machinery
This Dayton parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 153 RPM with a maximum torque of 125 in-lb and a full load current of 6.0 A. Not inverter rated. Suitable for applications such as conveyors, packaging machinery, and material handling equipment in dusty or non-hazardous environments
Dayton
This Dayton parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 153 RPM with a maximum torque of 125 in-lb and a full load current of 6.0 A. Not inverter rated. Suitable for applications such as conveyors, packaging machinery, and material handling equipment in dusty or non-hazardous environments
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 100 RPM with 38 in-lb maximum torque and draws 1.5 A full load current. Not inverter rated. Suitable for applications requiring low-speed torque such as conveyors and packaging machinery
Dayton
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 100 RPM with 38 in-lb maximum torque and draws 1.5 A full load current. Not inverter rated. Suitable for applications requiring low-speed torque such as conveyors and packaging machinery
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 39 RPM with a maximum torque of 450 in-lb and draws 6.0 A at full load. Not inverter rated. Suitable for applications such as conveyors, material handling, and packaging equipment
Dayton
This parallel shaft AC gearmotor features a single output shaft, split-phase design, and TEFC enclosure. It delivers 39 RPM with a maximum torque of 450 in-lb and draws 6.0 A at full load. Not inverter rated. Suitable for applications such as conveyors, material handling, and packaging equipment

Lainnya dari Dayton

Lihat semua Dayton suku cadang →
This Dayton parallel shaft AC gearmotor features a single output shaft, shaded pole design, and open enclosure. It delivers 7 RPM with a maximum torque of 113 in-lb and draws 2.6 A full load current. Not inverter rated. Suitable for low-speed, high-torque applications such as conveyors and packaging machinery
Dayton
This Dayton parallel shaft AC gearmotor features a single output shaft, shaded pole design, and open enclosure. It delivers 7 RPM with a maximum torque of 113 in-lb and draws 2.6 A full load current. Not inverter rated. Suitable for low-speed, high-torque applications such as conveyors and packaging machinery
This Dayton parallel shaft AC gearmotor is a split-phase, open drip-proof (ODP) unit with a single output shaft. It delivers 12 RPM and a maximum torque of 600 in-lb, with a full load current of 3.5 A. Not inverter rated. Typical applications include conveyor systems, material handling, and packaging machinery requiring low-speed, high-torque output
Dayton
This Dayton parallel shaft AC gearmotor is a split-phase, open drip-proof (ODP) unit with a single output shaft. It delivers 12 RPM and a maximum torque of 600 in-lb, with a full load current of 3.5 A. Not inverter rated. Typical applications include conveyor systems, material handling, and packaging machinery requiring low-speed, high-torque output
This parallel shaft AC gearmotor features a single output shaft, PSC motor, and open drip-proof enclosure. It delivers 4.5 RPM and 100 in-lb maximum torque, with a full load current of 0.3 A. The unit operates in both clockwise and counterclockwise directions and is not inverter rated. Typical applications include low-speed, constant-torque drives such as conveyors, packaging machinery, and material handling equipment
Dayton
This parallel shaft AC gearmotor features a single output shaft, PSC motor, and open drip-proof enclosure. It delivers 4.5 RPM and 100 in-lb maximum torque, with a full load current of 0.3 A. The unit operates in both clockwise and counterclockwise directions and is not inverter rated. Typical applications include low-speed, constant-torque drives such as conveyors, packaging machinery, and material handling equipment
This parallel shaft AC gearmotor features a single output shaft, PSC motor, and TEFC enclosure. It delivers 12 RPM output speed with 400 in-lb maximum torque and reversible CW/CCW rotation. Full load current is 1.2/0.63 A. Suitable for low-speed, high-torque applications such as conveyors, packaging machinery, and material handling equipment
Dayton
This parallel shaft AC gearmotor features a single output shaft, PSC motor, and TEFC enclosure. It delivers 12 RPM output speed with 400 in-lb maximum torque and reversible CW/CCW rotation. Full load current is 1.2/0.63 A. Suitable for low-speed, high-torque applications such as conveyors, packaging machinery, and material handling equipment
This parallel shaft AC gearmotor features a single output shaft with split-phase operation and a TEFC enclosure. It delivers 18 RPM at 0.33 hp input, with a full load current of 6 A and reversible CW/CCW rotation. Suitable for applications requiring low-speed torque such as conveyors and packaging machinery
Dayton
This parallel shaft AC gearmotor features a single output shaft with split-phase operation and a TEFC enclosure. It delivers 18 RPM at 0.33 hp input, with a full load current of 6 A and reversible CW/CCW rotation. Suitable for applications requiring low-speed torque such as conveyors and packaging machinery
Parallel shaft AC gearmotor with single output shaft, PSC motor, and TENV enclosure. Delivers 33 RPM output speed and 96 in-lb maximum torque at 115V AC, 0.6 A full load current. Not inverter rated. Suitable for applications requiring moderate torque at low speed, such as conveyors and packaging machinery
Dayton
Parallel shaft AC gearmotor with single output shaft, PSC motor, and TENV enclosure. Delivers 33 RPM output speed and 96 in-lb maximum torque at 115V AC, 0.6 A full load current. Not inverter rated. Suitable for applications requiring moderate torque at low speed, such as conveyors and packaging machinery
This parallel shaft AC gearmotor features a shaded pole design and TEFC enclosure. It delivers 2 RPM with a maximum torque of 113 in-lb and a full load current of 1.6 A. Not inverter rated. Suitable for low-speed, high-torque applications such as conveyors and material handling equipment
Dayton
This parallel shaft AC gearmotor features a shaded pole design and TEFC enclosure. It delivers 2 RPM with a maximum torque of 113 in-lb and a full load current of 1.6 A. Not inverter rated. Suitable for low-speed, high-torque applications such as conveyors and material handling equipment
This parallel shaft AC gearmotor features a single output shaft, shaded pole design, and TEFC enclosure. It delivers 7 RPM with a maximum torque of 113 in-lb and a full load current of 1.6 A. Not inverter rated. Suitable for low-speed, high-torque applications such as conveyors and packaging machinery
Dayton
This parallel shaft AC gearmotor features a single output shaft, shaded pole design, and TEFC enclosure. It delivers 7 RPM with a maximum torque of 113 in-lb and a full load current of 1.6 A. Not inverter rated. Suitable for low-speed, high-torque applications such as conveyors and packaging machinery