DEWALT Concrete Anchor Screw: 3 1/4 in Overall Lg, 3/16 in Dia, Steel, Zinc-Plated
The DEWALT Concrete Anchor Screw (MPN DFM2ELD430S) is a 3 1/4 in overall length, 3/16 in diameter flat-head screw anchor. It features a case-hardened steel, zinc-plated finish with a pointed tip and Torx drive…
SKU 3G-OTH-540906
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DEWALT Concrete Anchor Screw (MPN DFM2ELD430S) is a 3 1/4 in overall length, 3/16 in diameter flat-head screw anchor. It features a case-hardened steel, zinc-plated finish with a pointed tip and Torx drive, supplied in a 1,000-piece pack. This removable concrete anchor screw is designed for inch-system applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DEWALT Concrete Anchor Screw used for?
The DEWALT Concrete Anchor Screw is used for fastening fixtures, brackets, and equipment to concrete, brick, or block in construction and industrial settings. Its case-hardened steel and zinc-plated finish provide corrosion resistance and holding strength for permanent or removable installations.
What are the specifications of the DEWALT Concrete Anchor Screw DFM2ELD430S?
The DEWALT Concrete Anchor Screw DFM2ELD430S has a 3 1/4 in overall length and 3/16 in diameter. It features a case-hardened steel, zinc-plated finish with a pointed tip and Torx drive. This removable anchor is supplied in a 1,000-piece pack and is designed for inch-system applications.
Where to buy DEWALT Concrete Anchor Screws in worldwide?
3G Electric supplies and delivers DEWALT Concrete Anchor Screws worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility. Contact us for availability and lead time on the DFM2ELD430S 1,000-pack.
How to install a DEWALT Concrete Anchor Screw?
Drill a pilot hole into the concrete using a carbide bit matching the anchor diameter. Clean the hole of dust, then drive the DEWALT anchor screw with a Torx driver until the head is flush. The case-hardened steel and pointed tip allow for direct installation without a sleeve or expansion clip.
Digunakan dalam
Aplikasi umum untuk DEWALTDEWALT Produk
3G Electric memasok DEWALT flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









