DEWALT Concrete Anchor Screw: 3 3/4 in Overall Lg, 9/64 in Dia, Steel, Zinc-Plated
The DEWALT Concrete Anchor Screw (MPN DFM12750SB) is a 3 3/4 in overall length, 9/64 in diameter, case-hardened steel flat-head screw anchor with a zinc-plated finish and pointed tip. Supplied in a 1,000-piece pack…
SKU 3G-OTH-540917
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DEWALT Concrete Anchor Screw (MPN DFM12750SB) is a 3 3/4 in overall length, 9/64 in diameter, case-hardened steel flat-head screw anchor with a zinc-plated finish and pointed tip. Supplied in a 1,000-piece pack with a Torx drive, this removable inch-system anchor is designed for concrete fastening applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DEWALT Concrete Anchor Screw DFM12750SB used for?
The DEWALT Concrete Anchor Screw DFM12750SB is used for fastening fixtures, brackets, and equipment to concrete, brick, or block in construction and industrial settings. Its case-hardened steel and pointed tip enable reliable anchoring in solid masonry, while the Torx drive ensures secure installation.
What are the specifications of the DEWALT Concrete Anchor Screw DFM12750SB?
The DEWALT Concrete Anchor Screw DFM12750SB has an overall length of 3 3/4 in, a diameter of 9/64 in, and a zinc-plated finish. It is made of case-hardened steel, features a pointed tip and Torx drive, and is supplied in a 1,000-piece pack. It is removable and uses inch-system measurement.
Where to buy DEWALT Concrete Anchor Screw DFM12750SB worldwide?
3G Electric supplies the DEWALT Concrete Anchor Screw DFM12750SB to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this 1,000-pack concrete anchor screw for your project.
How to install DEWALT Concrete Anchor Screw DFM12750SB?
To install the DEWALT Concrete Anchor Screw DFM12750SB, drill a pilot hole in concrete using a hammer drill with a carbide bit matching the screw diameter. Clean the hole of dust, then drive the screw with a Torx driver until the head is flush. Ensure the anchor is fully seated for maximum holding strength.
Digunakan dalam
Aplikasi umum untuk DEWALTDEWALT Produk
3G Electric memasok DEWALT flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









