DUNGS CPI 400 & Visual Indicator

[{"filename":"cpi-400-vi_datasheet_us_240181.pdf","text":"Valve Position Indication\n\n CPI 400 Valve Switch\n Visual Indicator (VI)\n\n\n\n\n UL Unlisted Component\n • Covered in file # MH 16727\n\n CSA Certified Component\n • Covered in file # 157406\n\n FM Approved Component\n • Covered in file # J.I. 3007653\n\n Codes and Standards\n This product is intended for instal-\n lations covered by but not limited to\n NFPA 86, ANSI Z83.4/CSA 3.7, ANSI\n Z83.18/CSA 4.9, ANSI Z21.13, CSD-\n 1, UL 795, CSA B149.1, CSA B149.3\n and CSA B149.6.\n\n DUNGS is an ISO 9001 CPI 400\n manufacturing facility.\n\n\n\n\n Visual Indicator\n\n\n Description (CPI 400) shutoff valves. The CPI 400 is suitable\n The CPI 400 (closed position indicator) for dry natural gas, propane, butane, air\n visually and electrically indicates when and inert gases. Suitable for up to 0.1%\n the valve is either open or closed. The by volume, dry H2S when used with\n CPI 400 mounts directly to DUNGS au- stainless steel adapter.\n tomatic shutoff valves and may be used\n as a proof of closure switch when factory A “dry” gas has a dew point lower than\n set and sealed on a valve incorporating +15°F and its relative humidity is less\n overtravel. than 60 %.\n\n\n\n\n CPI 400 & VI Sales Brochure • P/N 240181 • Ed. 11/22\n Description (Visual Indicator) Application (Visual Indicator)\n The Visual Indicator indicates when the The Visual Indicator is recommended\n valve is either open or closed. The Visual for industrial and commercial heating\n Indicator mounts directly to DUNGS applications that require visual indi-\n automatic shutoff valves. cation of valve position on automatic\n shutoff valves. The Visual Indicator is\n Application (CPI 400) suitable for natural gas, propane, bu-\n The CPI 400 is recommended for indus- tane, air and inert gases. Suitable for up\n trial and commercial heating applica- to 0.1% by volume, dry H2S when used\n tions that require visual and/or electrical with stainless steel visual indicator.\n1…4 indication of valve position on automatic\n\f CPI 400 SPDT closed position indicator CPI 400 valve switch visually and electrically indicates when the valve\n is either in the closed or open position and may be used as a proof of closure switch when factory set\n and sealed on a valve incorporating overtravel. Mounts directly to the SV, MVD and DMV valves. When\n the valve is closed, an orange light is visible. When the valve is open, a green light is visible. When the\n optional 24 VAC/VDC light is used, the closed valve is indicated by a red light rather than an orange light.\n\nSpecifications\nMax. operating pressure 7 PSI (500 mbar)\nConnection Set screw with G 1/8” ISO 228 plunger\nTemperature range -40 °F to +150 °F (-40 °C to +65 °C)\nMaterials CPI Housing:\t\t Polycarbonate\n Switching contact: Silver (Ag)\n Plunger:\t\t Brass (standard version) or stainless steel\n Sealing:\t\t\t NBR based rubber\nElectrical ratings AC eff. 120 VAC\nNominal current AC max. 10 A resistive @ 120 VAC\n AC max. 8 A inductive @ 120 VAC\n AC max. 5 A resistive @ 230 VAC\n DC max. 1 A @ 12 - 48 VDC\n When used, the 24VDC/VAC indicator light consumes 20 mA when enegized.\nElectrical connection Screw terminals via 1/2” NPT conduit connection\nEnclosure rating NEMA Type 4\n\nCPI 400 Switching function\n\n\n Valve position Valve position\n Open Closed\n\n\n\n Light\n on\n\n\n\n\n G (green) G (green)\n O (orange) O (orange)\n Light\n NE (neon) NE (neon)\n on\n\n\n\n Visual Indicator indicates closed and open position of the safety valve\n\nSpecifications\nMax. operating pressure 7 PSI (500 mbar)\nConnection G 1/8” ISO 228\nTemperature range -40 °F to +150 °F (-40 °C to +65 °C)\nMaterials Brass housing (standard version) or stainless steel\n NBR based rubber\n\n\n\n\n 2…4\n\f Dimensions inch (mm)\n CPI 400 and Brass Adapter/Plunger\n\n\n\n\n Plunger\n\n\n G 1/8”\n\n\n\n\n 1.5 (37,4)\n 2 (50)\n\n\n\n Set screw\n Plunger connection\n\n\n\n 9/16”\n (~14)\n\n\n\n\n NPT 1/2”\n conduit\n connection\n\n\n\n\n Dimensions inch (mm)\n Visual Indicator\n\n 5/8” (~16)\n\n\n\n G 1/8”\n\n\n\n\n 2.3 (58)\n\n\n 1.1 (27)\n\n\n\n\n 0.6 (14.5)\n\n\n3…4\n\f Valve Position Indication\n\n CPI 400 Valve Switch\n Visual Indicator (VI)\n\n\n\n\nProduct Description and Order Numbers\nType Order No. Weight\n [lbs]\n [kg]\nCPI 400 valve switch (standard with brass adapter) 266968 0.63\n 0.29\nCPI 400 valve switch (with stainless steel adapter) 274058 0.90\n 0.40\nVisual Indicator (brass) 217665 0.04\n 0.02\nVisual Indicator (stainless steel) 273963 0.30\n 0.14\n\nAccessories/Replacement Parts - CPI 400 only\nType Order No.\nClear plastic cover with mounting screws 240837\n120 VAC neon lights (orange & green) 231420\n24 VDC LED lights (red & green) 248183\n1/2”NPT conduit adapter (PG 11) 220566\nBrass adapter (standard) 224417\nStainless steel adapter 273544\n230 V neon light (green) 248239\n230 V neon light (yellow)…