DUNGS SV/614 - Safety Shutoff Valves with "Proof of Closure" (US/CA)

[{"filename":"sv-614-poc_datasheet_us_243127.pdf","text":"SV - Safety Shutoff Valve\n with Proof of Closure\n 1/2\" NPT - 2\" NPT\n\n SV/614 Series\n SV-D/614 Series\n SV-DLE/614 Series\n\n\n\n\n Normally closed automatic shutoff\n valve with proof of closure and the\n following approvals.\n\n CSA Certified\n • ANSI Z21.21 • CSA 6.5\n • Marked C/I\n • File # 1350312\n\n FM Approved\n • Class 7400\n • File # 3014562\n\n Commonwealth of Massachusetts\n Approved Product\n • Approval code G1-1107-35\n • Gas Safety Shutoff Valve\n\n Codes and Standards\n This product is intended for instal-\n lations covered by but not limited to\n NFPA 86, NFPA 37, NFPA 160, ANSI\n Z83.4/ CSA 3.7, ANSI Z83.18/CSA\n 4.9, ANSI Z21.13, CSD-1, UL 2200,\n CAN1-3.1, CGA 3.2, CSA 3.8, CSA\n B149.1, CSA B149.3 CSA B149.6. Technical Description Application\n The SV... automatic safety shutoff valve The SV... is recommended for industrial\n DUNGS is an ISO 9001 is a single-stage automatic shut-off and commercial heating applications\n manufacturing facility. valve for gas burners and gas burning that require an automatic shutoff valve\n appliances: incorporating proof of closure. The SV...\n is suitable for dry natural gas, propane,\n - Double-seated valve with proof of butane, air and inert gases. Suitable for\n closure. up to 0.1% by volume, dry H2S.\n - Max. operating pressure up to 10 PSI\n\n\n\n\n SV/614 Sales Brochure • P/N 243127 • Edition 2024.04\n (700 mbar) A “dry” gas has a dew point lower than\n - SV & SV-D: fast-open/fast-close +15 °F and its relative humidity is less\n - SV-DLE: slow-open with adjustable than 60 %.\n inital lift, fast closing\n - Main flow adjustment\n - Pipe thread on the inlet side, threaded\n flange on outlet side\n - Threaded flange on the inlet side\n optional\n - High flow rates\n - DMV modular mount accessories can\n1…8 be used in most cases\n\fSV.../614 Single-stage automatic shutoff valve, fast-opening, fast-closing. Incorporates proof of closure.\n\nSV-D.../614 Single-stage automatic shutoff valve, fast opening, fast closing. Adjustable max flow.\n Incorporates proof of closure.\n\nSV-DLE.../614 Single-stage automatic shutoff valve, slow opening, fast closing. Adjustable max flow and adjustable initial lift.\n Incorporates proof of closure.\n\nSpecifications\nModel SV 1005 SV 1007 SV 1010 SV 1012 SV 1015 SV 1020\nSize (NPT) 1/2\" 3/4\" 1\" 1 1/4\" 1 1/2\" 2\"\n Pipe thread on the inlet side,threaded flange on outlet side\nMax. operating pressure 10 PSI (700 mbar)\nMax. body pressure 15 PSI (1000 mbar)\nMax. close off pressure 15 PSI (1000 mbar)\nElectrical ratings (+10 % / -15 %) 120 VAC @ 50 - 60 Hz\nPower ratings See page 5.\nEnclosure ratings NEMA 4 for NEMA 4 indoor only\n NEMA 12\nElectrical connection DIN-connector with 1/2” NPT conduit adapter\nOperating time 100 % duty cycle\nClosing time <1s\nOpening time (to max. flow) SV... & SV-D/614\t\t <1s\n SV-DLE…/614\t\t\t Adjustable to approx. 10 to 20 s at 70 °F\nInitial lift adjustment SV-DLE…/614 ONLY\t\t 0 to 70 % of total flow; 0 to 35% of stroke\nMax. flow adjustment SV-D & SV-DLE…/614 ONLY 0 to 100 % of total flow; 0 to 100% of stroke.\n When adjusted to low flows, flow repeatability upon opening is +/-15%.\nMaterials in contact with gas Housing:\t\t\t Aluminium, Steel; free of non-ferrous metals\n Sealings on valve seats: NBR-based rubber\nAmbient temperature rating -20 °F to +140 °F (-29 °C to +60 °C)\nInstallation position Safety shut off valve from vertically upright to horizontal\nTest ports / G 1/8 ISO 228 ports available.\nPressure switch mounting ports See page 3 and 4 for details.\nGas strainer (standard) Installed in the housing upstream (23 mesh)\nProof of closure switch SPDT switch with indication lamps: AC max. 10 A resistive  @ 120 VAC\nFactory mounted and calibrated AC max.   8 A inductive @ 120 VAC\nValve proving system Requires VPS 504; mounts directly to either side of SV... 1010 - 1020 only\n\n\n\n\n 2…8\n\f SV... 10../614\n Port Port\n\n\n\n\n Pe, max. = 10 PSI\n (700 mbar)\n SV\n\n\n Low gas pressure High gas pressure\n switch switch\n Proof of\n closure\n switch\n\n\n Valve Proving System\n for SV... 1010-1020 only When an accessory is added\n to the SV..., it may not be pos-\n sible to mount other devices.\n\n Test Ports\n The position of the side taps #2 and #3 on the\n G1/8 ISO 228 test ports available on both sides of the valve.\n SV... 1005/1007 are not the same as on the\n Each side has one test port upstream (2), one downstream\n SV... 1010-1020 valves.\n (3) of the valve seat. One Inlet (1) and outlet (4) of valve body. 2 3\n The SV... 1010, 1012, 1015, and 1020 have one outlet (5) on\n valve flange. The G 1/8 test nipple (# 219008) can be screwed\n into any of the test ports.\n 1 2 3 4\n SV...: 1005, 1007 SV...: 1010, 1012\n SV...: 1015, 1020\n\n\n\n Back side tap 2 3 Back side tap Back side tap 2 3 Back side tap\n\n\n\n\n 1 2 3 4 1 2 3 4\n Filter Front Front\n Filter Front Front\n side side\n…