DWYER Carbon Dioxide/Temperature Transmitter: Building Management Controllers, Carbon Dioxide
The DWYER CDT Series Carbon Dioxide/Temperature Transmitter (MPN CDT-2D4E) is a duct-mounted detector transmitter for building management controllers, detecting carbon dioxide across a 0 to 2000 ppm range. It…
SKU 3G-OTH-554854
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DWYER CDT Series Carbon Dioxide/Temperature Transmitter (MPN CDT-2D4E) is a duct-mounted detector transmitter for building management controllers, detecting carbon dioxide across a 0 to 2000 ppm range. It operates on 16 to 35V DC or 19 to 28V AC, integrating CO2 and temperature sensing into a single device for HVAC demand-controlled ventilation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DWYER CDT-2D4E Carbon Dioxide/Temperature Transmitter used for?
The DWYER CDT-2D4E is a duct-mounted detector transmitter that measures carbon dioxide levels from 0 to 2000 ppm and temperature for building management controllers. It enables demand-controlled ventilation in HVAC systems, improving indoor air quality and energy efficiency in commercial buildings.
What are the specifications of the DWYER CDT-2D4E?
The DWYER CDT-2D4E detects carbon dioxide (0 to 2000 ppm) and temperature. It operates on 16 to 35V DC or 19 to 28V AC, mounts in a duct, and is designed for use with building management controllers. It is part of the DWYER CDT Series and does not include a calibration certificate.
Where to buy the DWYER CDT-2D4E worldwide?
3G Electric supplies the DWYER CDT-2D4E Carbon Dioxide/Temperature Transmitter to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this DWYER detector transmitter.
How to install the DWYER CDT-2D4E duct-mounted CO2 transmitter?
Install the DWYER CDT-2D4E in a duct location with representative airflow, following the manufacturer's mounting instructions. Ensure the operating voltage (16 to 35V DC or 19 to 28V AC) matches your supply. Connect to the building management controller per the wiring diagram. Calibration is recommended per site requirements.
Digunakan dalam
Aplikasi umum untuk DWYERDWYER Produk
3G Electric memasok DWYER fixed gas detectors with transmitters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









