DWYER Carbon Dioxide/RH/Temperature Transmitter: Building Management Controllers, Carbon Dioxide
The DWYER CDTR Series Carbon Dioxide/RH/Temperature Transmitter (MPN CDTR-2D4A4) is a duct-mounted detector transmitter for building management controllers, detecting carbon dioxide across a 0 to 2000 ppm range. It…
SKU 3G-OTH-554849
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DWYER CDTR Series Carbon Dioxide/RH/Temperature Transmitter (MPN CDTR-2D4A4) is a duct-mounted detector transmitter for building management controllers, detecting carbon dioxide across a 0 to 2000 ppm range. It operates on 16 to 35V DC or 19 to 28V AC, with a Type 4X enclosure. 3G Electric interprets this demand and delivers the genuine DWYER unit, backed by specialist expertise across 14 industrial departments—including combustion, pumps, and controls—to ensure you get the right solution, not just a part.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DWYER CDTR-2D4A4 carbon dioxide transmitter used for?
The DWYER CDTR-2D4A4 is a duct-mounted detector transmitter that measures carbon dioxide (0 to 2000 ppm), relative humidity, and temperature for building management controllers. It helps optimize HVAC ventilation and indoor air quality in commercial and industrial facilities.
What are the specifications of the DWYER CDTR-2D4A4?
The DWYER CDTR-2D4A4 operates on 16 to 35V DC or 19 to 28V AC, detects carbon dioxide from 0 to 2000 ppm, and features a Type 4X enclosure. It is designed for duct mounting and interfaces with building management controllers.
Where to buy the DWYER CDTR-2D4A4 worldwide?
3G Electric supplies the genuine DWYER CDTR-2D4A4 worldwide. We handle full logistics, customs clearance, and delivery to your site. As a specialist industrial solutions provider across 14 departments, we ensure you get the right transmitter for your building management system.
How to install the DWYER CDTR-2D4A4 duct-mounted transmitter?
Install the DWYER CDTR-2D4A4 by mounting it in the duct with the sensor facing airflow. Connect power (16 to 35V DC or 19 to 28V AC) and signal wires per the manual. Avoid condensation and direct sunlight. Calibrate per manufacturer guidelines for accurate CO₂ readings.
Digunakan dalam
Aplikasi umum untuk DWYERDWYER Produk
3G Electric memasok DWYER fixed gas detectors with transmitters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









