Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Dwyer TE-DFN-B0448-00 Flange-Mount Duct Thermistor Probe - Flange-Mount Duct Thermistor Probes
DwyerFlange-Mount Duct Thermistor Probes

Dwyer TE-DFN-B0448-00 Flange-Mount Duct Thermistor Probe

Dwyer menghadirkan TE-DFN-B0448-00, sebuah probe suhu saluran udara (duct thermistor probe) tipe flange-mount dengan elemen 10.000 ohm bare wire. Probe ini dirancang untuk pengukuran suhu dalam rentang -40°F hingga…

SKU 3G-OTH-183869

Juga terdaftar sebagai: TEDFNB044800 · TE DFN B0448 00

Merek
Dwyer
Item
TE-DFN-B0448-00 Flange-Mount Duct Thermistor Probe
Kategori
Flange-Mount Duct Thermistor Probes
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

Dwyer
Manufacturer Part Number
TE-DFN-B0448-00
Type
10,000 ohm, Bare Wire
Accuracy
+/-0.15°C at 0°C (+/-0.28°F at 32°F)
Cable Length
8 ft

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

Dwyer Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Dwyer menghadirkan TE-DFN-B0448-00, sebuah probe suhu saluran udara (duct thermistor probe) tipe flange-mount dengan elemen 10.000 ohm bare wire. Probe ini dirancang untuk pengukuran suhu dalam rentang -40°F hingga 302°F (-40°C hingga 150°C) dengan akurasi tinggi +/-0,15°C pada 0°C (+/-0,28°F pada 32°F). Dilengkapi kabel sepanjang 8 ft, produk ini ideal untuk aplikasi HVAC dan sistem kontrol lingkungan di industri. Cari probe suhu duct untuk sistem HVAC Anda? Dwyer TE-DFN-B0448-00 adalah pilihan tepat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa Dwyer TE-DFN-B0448-00 digunakan?

Dwyer TE-DFN-B0448-00 adalah probe suhu saluran udara (duct thermistor probe) tipe flange-mount yang digunakan untuk memantau suhu dalam sistem HVAC, ventilasi, dan kontrol lingkungan industri. Probe ini memiliki rentang pengukuran -40°F hingga 302°F (-40°C hingga 150°C) dengan akurasi +/-0,15°C pada 0°C.

Apa spesifikasi teknis Dwyer TE-DFN-B0448-00?

Spesifikasi Dwyer TE-DFN-B0448-00 meliputi: tipe 10.000 ohm bare wire, akurasi +/-0,15°C pada 0°C (+/-0,28°F pada 32°F), panjang kabel 8 ft, rentang suhu -40°F hingga 302°F (-40°C hingga 150°C), dan nomor part pabrikan TE-DFN-B0448-00.

Bagaimana cara memasang Dwyer TE-DFN-B0448-00?

Dwyer TE-DFN-B0448-00 dipasang dengan metode flange-mount pada saluran udara (duct). Pastikan probe terpasang dengan benar pada dinding saluran dan kabel sepanjang 8 ft diarahkan ke sistem kontrol. Untuk hasil optimal, ikuti panduan pemasangan dari pabrikan dan pastikan tidak ada kebocoran udara di sekitar flange.

Di mana beli Dwyer TE-DFN-B0448-00 di Indonesia?

Anda dapat membeli Dwyer TE-DFN-B0448-00 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima probe suhu duct ini dengan mudah. Hubungi kami untuk minta penawaran.

Digunakan dalam

Aplikasi umum untuk Dwyer
Combustion air-filter monitoring — Magnehelic Series 2000 on burner air-intake filter banks
Clean-room and pharmaceutical pressurisation — Magnehelic / Capsuhelic differential-pressure gauges
HVAC fan-discharge static pressure — Mark II inclined-vertical manometers on AHU test points
Filter-blockage alarms — Photohelic Series 3000 combined gauge/switch on air-handling units
BMS-integrated pressure monitoring — Digihelic DH3 with 4–20 mA output for building management

Dwyer Produk

3G Electric memasok Dwyer flange-mount duct thermistor probes. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Heater accessory temperature sensor for monitoring temperature in combustion and HVAC systems. Used in boilers, furnaces, and process heaters to support safe burner operation
Fireye
Heater accessory temperature sensor for monitoring temperature in combustion and HVAC systems. Used in boilers, furnaces, and process heaters to support safe burner operation
Flame scanner for detecting flame presence in industrial burners, boilers, and furnaces. Used in combustion safety systems to verify ignition and monitor flame stability
Fireye
Flame scanner for detecting flame presence in industrial burners, boilers, and furnaces. Used in combustion safety systems to verify ignition and monitor flame stability
Flame scanner for detecting flame presence in industrial burners, boilers, and furnaces. Used in HVAC and refrigeration systems to monitor burner flame and initiate safety shutdowns if flame loss occurs
Fireye
Flame scanner for detecting flame presence in industrial burners, boilers, and furnaces. Used in HVAC and refrigeration systems to monitor burner flame and initiate safety shutdowns if flame loss occurs
Flame scanner for use in industrial burners and combustion systems. Detects flame presence and provides a safety signal to the burner controller to prevent unburned fuel accumulation and enable safe shutdown upon flame loss
Fireye
Flame scanner for use in industrial burners and combustion systems. Detects flame presence and provides a safety signal to the burner controller to prevent unburned fuel accumulation and enable safe shutdown upon flame loss
Flame scanner for industrial combustion systems. Detects flame presence in burners used in boilers, furnaces, and process heaters. Provides safety and control feedback to prevent unburned fuel accumulation and enable safe shutdown
Fireye
Flame scanner for industrial combustion systems. Detects flame presence in burners used in boilers, furnaces, and process heaters. Provides safety and control feedback to prevent unburned fuel accumulation and enable safe shutdown
Ultraviolet flame scanner for detecting UV radiation from burner flames. Used in burner management systems for industrial boilers, furnaces, and process heaters to verify flame presence and support safe operation
Fireye
Ultraviolet flame scanner for detecting UV radiation from burner flames. Used in burner management systems for industrial boilers, furnaces, and process heaters to verify flame presence and support safe operation

Lainnya dari Dwyer

Lihat semua Dwyer suku cadang →
Flange-mount duct thermistor probe with 10,000 ohm bare wire termination. Accuracy ±0.22°C at 25°C (±0.4°F at 77°F). Includes 8 ft cable. Used for air temperature measurement in HVAC ducts and ventilation systems
Dwyer
Flange-mount duct thermistor probe with 10,000 ohm bare wire termination. Accuracy ±0.22°C at 25°C (±0.4°F at 77°F). Includes 8 ft cable. Used for air temperature measurement in HVAC ducts and ventilation systems
Flange-mount duct thermistor probe for air temperature measurement in HVAC ducts. Features a 10,000 ohm resistance, accuracy of +/-0.15°C at 0°C, and an 8 ft cable with bare wire termination. Suitable for building automation and environmental control systems
Dwyer
Flange-mount duct thermistor probe for air temperature measurement in HVAC ducts. Features a 10,000 ohm resistance, accuracy of +/-0.15°C at 0°C, and an 8 ft cable with bare wire termination. Suitable for building automation and environmental control systems
Flange-mount duct thermistor probe for air temperature measurement in HVAC ducts and ventilation systems. Features 10,000 ohm resistance, accuracy of +/-0.15°C at 0°C, and 8 ft cable with bare wire termination
Dwyer
Flange-mount duct thermistor probe for air temperature measurement in HVAC ducts and ventilation systems. Features 10,000 ohm resistance, accuracy of +/-0.15°C at 0°C, and 8 ft cable with bare wire termination
Flange-mount duct thermistor probe for measuring air temperature in HVAC ducts. Features a 10,000 ohm resistance, accuracy of +/-0.22°C at 25°C, and a 4-inch cable with bare wire termination. Suitable for building automation and environmental control systems
Dwyer
Flange-mount duct thermistor probe for measuring air temperature in HVAC ducts. Features a 10,000 ohm resistance, accuracy of +/-0.22°C at 25°C, and a 4-inch cable with bare wire termination. Suitable for building automation and environmental control systems
Flange-mount duct thermistor probe for temperature measurement in HVAC duct systems. Features a 10,000 ohm thermistor with accuracy of +/-0.22°C at 25°C (+/-0.4°F at 77°F). Includes a 4-inch cable with bare wire termination
Dwyer
Flange-mount duct thermistor probe for temperature measurement in HVAC duct systems. Features a 10,000 ohm thermistor with accuracy of +/-0.22°C at 25°C (+/-0.4°F at 77°F). Includes a 4-inch cable with bare wire termination
Flange-mount duct thermistor probe with 10,000 ohm resistance and bare wire termination. Accuracy of ±0.22°C at 25°C. Cable length 4 in. Used for measuring air temperature in HVAC ductwork
Dwyer
Flange-mount duct thermistor probe with 10,000 ohm resistance and bare wire termination. Accuracy of ±0.22°C at 25°C. Cable length 4 in. Used for measuring air temperature in HVAC ductwork
Flange-mount duct thermistor probe for HVAC air temperature measurement. Features a 20,000 ohm thermistor with ±0.22°C accuracy at 25°C. Includes 8 ft bare wire cable for connection to building automation or control systems
Dwyer
Flange-mount duct thermistor probe for HVAC air temperature measurement. Features a 20,000 ohm thermistor with ±0.22°C accuracy at 25°C. Includes 8 ft bare wire cable for connection to building automation or control systems