DYNABRADE Contact Arm: 1/2 in Belt Wd, 18 in Belt Lg, Dynafile II Series, 5/16 in Wheel Dia
The DYNABRADE Contact Arm (MPN 11201) is a crowned belt sander contact arm for 1/2 in belt width and 18 in belt length, designed for the Dynafile II Series with a 5/16 in wheel diameter. It is a genuine DYNABRADE…
SKU 3G-OTH-158578
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DYNABRADE Contact Arm (MPN 11201) is a crowned belt sander contact arm for 1/2 in belt width and 18 in belt length, designed for the Dynafile II Series with a 5/16 in wheel diameter. It is a genuine DYNABRADE component, identified by SKU 804UE0 and attribute 40611, and is compatible with the series as indicated by the 'Yes' specification.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DYNABRADE Contact Arm 11201 used for?
The DYNABRADE Contact Arm 11201 is a crowned belt sander arm for the Dynafile II Series. It supports 1/2 in belt width and 18 in belt length, with a 5/16 in wheel diameter, enabling precise contour sanding and finishing on metal, wood, and composite surfaces in industrial fabrication and maintenance.
What are the specifications of the DYNABRADE Contact Arm 11201?
The DYNABRADE Contact Arm 11201 is a crowned Dynafile II Series component with 1/2 in belt width, 18 in belt length, and 5/16 in wheel diameter. It is a genuine DYNABRADE part (MPN 11201, SKU 804UE0) designed for use with the Dynafile II series, as confirmed by the manufacturer specification.
Where to buy the DYNABRADE Contact Arm 11201 worldwide?
3G Electric supplies the DYNABRADE Contact Arm 11201 to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this crowned Dynafile II Series contact arm. Contact us for availability and lead time to your location.
How to install the DYNABRADE Contact Arm on a Dynafile II?
To install the DYNABRADE Contact Arm 11201 on a Dynafile II Series sander, first disconnect power. Remove the existing arm by loosening the mounting screw, then align the new crowned arm with the drive wheel and secure it. Ensure the belt tracks properly before operation. Always follow the tool manual for torque specifications.
Digunakan dalam
Aplikasi umum untuk DYNABRADEDYNABRADE Produk
3G Electric memasok DYNABRADE belt sander contact arms. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
