DYNABRADE Contact Arm: 3/4 in Belt Wd, 34 in Belt Lg, Dynafile II Series, 5/16 in Wheel Dia
The DYNABRADE Contact Arm (MPN 11350) is a belt sander contact arm for the Dynafile II Series, designed for 3/4 in belt width and 34 in belt length. It features a crowned wheel with a 5/16 in diameter and is…
SKU 3G-OTH-158570
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DYNABRADE Contact Arm (MPN 11350) is a belt sander contact arm for the Dynafile II Series, designed for 3/4 in belt width and 34 in belt length. It features a crowned wheel with a 5/16 in diameter and is identified by part number 40352.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DYNABRADE Contact Arm 11350 used for?
The DYNABRADE Contact Arm 11350 is a belt sander contact arm designed for the Dynafile II Series. It is used for precision grinding, deburring, and finishing on metal, wood, and composite surfaces, particularly in tight or contoured areas where a standard sander cannot reach.
What are the specifications of the DYNABRADE Contact Arm 11350?
The DYNABRADE Contact Arm 11350 is part of the Dynafile II Series and features a crowned wheel with a 5/16 in diameter. It accepts a 3/4 in belt width and a 34 in belt length. The manufacturer part number is 11350, and the replacement part number is 40352.
Where to buy the DYNABRADE Contact Arm 11350 worldwide?
You can source the DYNABRADE Contact Arm 11350 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive the correct Dynafile II Series contact arm for your application.
How to install the DYNABRADE Contact Arm on a Dynafile II?
To install the DYNABRADE Contact Arm 11350 on a Dynafile II, first disconnect the tool from air supply. Remove the existing arm by loosening the retaining screw, then slide the new crowned arm into place. Secure the screw and ensure the belt tracks properly before use. Always follow the manufacturer's safety guidelines.
Digunakan dalam
Aplikasi umum untuk DYNABRADEDYNABRADE Produk
3G Electric memasok DYNABRADE belt sander contact arms. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
