DYNAQUIP CONTROLS Pneumatically Actuated Two-Way Ball Valve: 1 1/2 in, Stainless Steel
The DYNAQUIP CONTROLS Pneumatically Actuated Two-Way Ball Valve (SKU 1AWR7, MPN P3S27AJSR07510A) is a stainless steel ball valve with a 1 1/2 inch FNPT x FNPT connection. It features a pilot solenoid voltage of 115V…
SKU 3G-OTH-444228
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DYNAQUIP CONTROLS Pneumatically Actuated Two-Way Ball Valve (SKU 1AWR7, MPN P3S27AJSR07510A) is a stainless steel ball valve with a 1 1/2 inch FNPT x FNPT connection. It features a pilot solenoid voltage of 115V AC for actuation control.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DYNAQUIP CONTROLS pneumatically actuated ball valve used for?
This valve is used for on/off flow control of liquids or gases in industrial piping systems. Its stainless steel construction and FNPT connections make it suitable for applications requiring corrosion resistance, such as chemical processing, water treatment, and oil and gas.
What are the specifications of the DYNAQUIP CONTROLS P3S27AJSR07510A ball valve?
This pneumatically actuated two-way ball valve has a 1 1/2 inch FNPT x FNPT connection, a stainless steel body, and a pilot solenoid voltage of 115V AC. The manufacturer part number is P3S27AJSR07510A, and it is supplied by DYNAQUIP CONTROLS.
Where to buy the DYNAQUIP CONTROLS pneumatically actuated ball valve worldwide?
3G Electric supplies the DYNAQUIP CONTROLS pneumatically actuated ball valve worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this valve for your project.
How to install a DYNAQUIP CONTROLS pneumatically actuated ball valve?
Ensure the pipeline is depressurized and clean before installation. Mount the valve with the actuator in the correct orientation, connect the FNPT ends using compatible thread sealant, and wire the 115V AC pilot solenoid per local electrical codes. Test for leaks before full operation.
Digunakan dalam
Aplikasi umum untuk DYNAQUIP CONTROLSDYNAQUIP CONTROLS Produk
3G Electric memasok DYNAQUIP CONTROLS stainless steel pneumatically-actuated ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
