EATON Supplementary Protector: 8 A Amps, 96V DC, 15kA at 277/480V AC, Lug, FAZ
The EATON FAZ-C8/2 is a C-curve, 2-pole UL1077 DIN rail-mount supplementary protector rated at 8 A. It carries a maximum AIR rating of 15 kA at 277/480 V AC and a DC voltage rating of 96 V DC, with lug-type terminal…
SKU 3G-OTH-20811
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The EATON FAZ-C8/2 is a C-curve, 2-pole UL1077 DIN rail-mount supplementary protector rated at 8 A. It carries a maximum AIR rating of 15 kA at 277/480 V AC and a DC voltage rating of 96 V DC, with lug-type terminal connections. This IEC supplementary protector is designed for overcurrent protection in industrial control panels and branch circuits.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the EATON FAZ-C8/2 supplementary protector used for?
The EATON FAZ-C8/2 is a C-curve, 2-pole UL1077 DIN rail-mount supplementary protector rated at 8 A. It provides overcurrent protection in industrial control panels and branch circuits, handling up to 15 kA at 277/480 V AC and 96 V DC with lug terminals.
What are the specifications of the EATON FAZ-C8/2?
The EATON FAZ-C8/2 is rated 8 A with a C-curve, 2-pole design. It has an AC voltage rating of 277/480 V AC, DC voltage rating of 96 V DC, and a maximum AIR rating of 15 kA at 277/480 V AC. Terminal connection is lug type, and it is part of the FAZ series.
Where to buy the EATON FAZ-C8/2 in worldwide?
3G Electric supplies the EATON FAZ-C8/2 supplementary protector to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this genuine EATON component to your facility, regardless of location.
How to install the EATON FAZ-C8/2 on a DIN rail?
To install the EATON FAZ-C8/2, snap it onto a standard 35 mm DIN rail until it locks. Ensure the circuit is de-energized, connect wires to the lug terminals per the torque specs in the manual, and verify the C-curve matches your load type for proper overcurrent protection.
Digunakan dalam
Aplikasi umum untuk EATONEATON Produk
3G Electric memasok EATON c-curve, 2-pole ul1077 din rail-mount supplementary protectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
