EATON Miniature Circuit Breaker: 3 A Amps, 48V DC, 10kA at 277/480V AC, Screw Clamp
The EATON FAZ-C3/1-NA-SP is a 3 A, C-Curve, 1-pole IEC miniature circuit breaker designed for DIN rail mounting. It is rated for 277/480V AC with a maximum interrupting rating of 10kA, and also carries a 48V DC…
SKU 3G-OTH-22470
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The EATON FAZ-C3/1-NA-SP is a 3 A, C-Curve, 1-pole IEC miniature circuit breaker designed for DIN rail mounting. It is rated for 277/480V AC with a maximum interrupting rating of 10kA, and also carries a 48V DC rating. The unit features screw-clamp terminals and is UL489 listed.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the EATON FAZ-C3/1-NA-SP miniature circuit breaker used for?
The EATON FAZ-C3/1-NA-SP is a 3 A, C-Curve, 1-pole IEC miniature circuit breaker used for overcurrent protection in commercial and industrial DIN rail panels. It protects branch circuits rated up to 277/480V AC or 48V DC, and is UL489 listed for North American installations.
What are the specifications of the EATON FAZ-C3/1-NA-SP?
The EATON FAZ-C3/1-NA-SP is a 3 A, C-Curve, 1-pole miniature circuit breaker with a max interrupting rating of 10kA at 277/480V AC and a DC voltage rating of 48V DC. It uses screw-clamp terminals and mounts on a DIN rail. The MPN is FAZ-C3/1-NA-SP.
Where to buy the EATON FAZ-C3/1-NA-SP worldwide?
You can source the EATON FAZ-C3/1-NA-SP through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this FAZ-NA series breaker.
How to install the EATON FAZ-C3/1-NA-SP on a DIN rail?
To install the EATON FAZ-C3/1-NA-SP, snap the breaker onto a standard 35 mm DIN rail until it locks. Connect line and load wires to the screw-clamp terminals using the specified torque. Ensure the circuit is de-energized before installation and follow local electrical codes.
Digunakan dalam
Aplikasi umum untuk EATONEATON Produk
3G Electric memasok EATON c-curve, 1-pole ul489 din rail-mount miniature circuit breakers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















