EATON Miniature Circuit Breaker: 30 A Amps, 48/96V DC, 10kA at 277/480V AC, Screw Clamp
The EATON FAZ-C30/2-NA is a 30 A, C-Curve, 2-pole UL489 miniature circuit breaker designed for DIN rail mounting. It is rated for 10kA at 277/480V AC and 48/96V DC, with screw clamp terminals. This IEC breaker…
SKU 3G-OTH-20578
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The EATON FAZ-C30/2-NA is a 30 A, C-Curve, 2-pole UL489 miniature circuit breaker designed for DIN rail mounting. It is rated for 10kA at 277/480V AC and 48/96V DC, with screw clamp terminals. This IEC breaker provides overcurrent protection for industrial electrical distribution systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the EATON FAZ-C30/2-NA miniature circuit breaker used for?
The EATON FAZ-C30/2-NA is a 30 A, C-curve, 2-pole UL489 miniature circuit breaker used for overcurrent protection in industrial electrical distribution systems. It is suitable for DIN rail mounting and protects branch circuits in panelboards, control panels, and equipment rated up to 277/480V AC or 48/96V DC.
What are the specifications of the EATON FAZ-C30/2-NA?
The EATON FAZ-C30/2-NA is rated 30 A, 277/480V AC with a 10kA interrupting rating, and 48/96V DC. It features a C-curve trip characteristic, 2-pole configuration, screw clamp terminals, and UL489 listing. The manufacturer part number is FAZ-C30/2-NA, and it mounts on standard DIN rail.
Where to buy the EATON FAZ-C30/2-NA worldwide?
3G Electric supplies the EATON FAZ-C30/2-NA miniature circuit breaker worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this Eaton breaker to any country.
How to install the EATON FAZ-C30/2-NA on a DIN rail?
To install the EATON FAZ-C30/2-NA, snap the breaker onto a standard 35 mm DIN rail until it locks. Ensure the rail is clean and the breaker is oriented correctly. Connect phase and load wires to the screw clamp terminals, tightening to the torque specified on the label. Always de-energize the system before installation.
Digunakan dalam
Aplikasi umum untuk EATONEATON Produk
3G Electric memasok EATON c-curve, 2-pole ul489 din rail-mount miniature circuit breakers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















