EATON Mini Control Relay: DIN-Rail Relay Mounting, 240V AC Coil Volt, 4NO
The EATON IEC Mini Control Relay is a DIN-rail-mounted relay with a 240V AC coil voltage, 4 normally open (4NO) contacts rated at 10 A (MPN XTRM10A40B). 3G Electric interprets your demand for this control component…
SKU 3G-OTH-37407
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The EATON IEC Mini Control Relay is a DIN-rail-mounted relay with a 240V AC coil voltage, 4 normally open (4NO) contacts rated at 10 A (MPN XTRM10A40B). 3G Electric interprets your demand for this control component and delivers it as part of our global industrial supply across 14 departments, with specialist depth in controls to support your automation needs.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the EATON XTRM10A40B IEC Mini Control Relay used for?
The EATON XTRM10A40B is a DIN-rail-mounted control relay used in industrial automation and panel building to switch loads up to 10 A. Its 4 normally open contacts and 240V AC coil make it suitable for motor control, conveyor systems, and HVAC equipment in manufacturing and process plants.
What are the specifications of the EATON XTRM10A40B relay?
The EATON XTRM10A40B is a 4NO, 10 A IEC mini control relay with a 240V AC coil voltage. It mounts on a DIN rail and is designed for reliable switching in industrial control panels. The manufacturer part number is XTRM10A40B.
Where to buy the EATON XTRM10A40B relay worldwide?
3G Electric supplies the EATON XTRM10A40B relay to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this DIN-rail relay for your industrial control application.
How to install the EATON XTRM10A40B relay on a DIN rail?
To install the EATON XTRM10A40B, snap it onto a standard 35 mm DIN rail until it locks. Wire the 240V AC coil to the designated terminals and connect your load to the 4 normally open contacts rated at 10 A. Always follow local electrical codes and isolate power before installation.
Digunakan dalam
Aplikasi umum untuk EATONEATON Produk
3G Electric memasok EATON din rail-mounted relays. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
