EATON Miniature Circuit Breaker: 40 A Amps, 125V DC, 10 kA at 277/480V AC, Screw
The EATON FAZ-C40/2-NA-DC is a C-Curve, 2-pole UL489 DIN rail-mount miniature circuit breaker rated for 40 A amps. It features a DC voltage rating of 125V DC and a maximum AIR rating of 10 kA at 277/480V AC, with…
SKU 3G-OTH-20829
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The EATON FAZ-C40/2-NA-DC is a C-Curve, 2-pole UL489 DIN rail-mount miniature circuit breaker rated for 40 A amps. It features a DC voltage rating of 125V DC and a maximum AIR rating of 10 kA at 277/480V AC, with screw terminal connections.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the EATON FAZ-C40/2-NA-DC miniature circuit breaker used for?
The EATON FAZ-C40/2-NA-DC is a C-curve, 2-pole UL489 DIN rail-mount miniature circuit breaker used for DC branch circuit protection in industrial control panels, solar combiner boxes, and battery systems. It provides overcurrent and short-circuit protection for 125V DC circuits up to 40 A.
What are the specifications of the EATON FAZ-C40/2-NA-DC?
The EATON FAZ-C40/2-NA-DC is rated for 40 A amps with a DC voltage rating of 125V DC. It has a maximum AIR rating of 10 kA at 277/480V AC and features screw terminal connections. This C-curve, 2-pole breaker is UL489 listed for DIN rail mounting.
Where to buy the EATON FAZ-C40/2-NA-DC worldwide?
You can source the EATON FAZ-C40/2-NA-DC through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this Eaton miniature circuit breaker.
How to install the EATON FAZ-C40/2-NA-DC on a DIN rail?
To install the EATON FAZ-C40/2-NA-DC, snap the breaker onto a standard 35 mm DIN rail until the latch engages. Connect DC supply wires to the screw terminals using the torque specified on the breaker label. Ensure the circuit is de-energized before installation and follow local electrical codes.
Digunakan dalam
Aplikasi umum untuk EATONEATON Produk
3G Electric memasok EATON c-curve, 2-pole ul489 din rail-mount miniature circuit breakers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















