Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ELECTRIDUCT TL-BJT-CR12-1000W Non-Conductive Conduit Rodder - Non-Conductive Conduit Rodders
ELECTRIDUCTNon-Conductive Conduit Rodders

ELECTRIDUCT TL-BJT-CR12-1000W Non-Conductive Conduit Rodder

ELECTRIDUCT Cable Rodder adalah alat bantu penarikan kabel non-konduktif yang dirancang untuk instalasi saluran listrik dan data. Produk ini memiliki panjang 1.000 ft (kaki) dengan tipe bulat (round) dari bahan…

SKU 3G-OTH-407201

Juga terdaftar sebagai: TLBJTCR121000W · TL BJT CR12 1000W

Merek
ELECTRIDUCT
Item
TL-BJT-CR12-1000W Non-Conductive Conduit Rodder
Kategori
Non-Conductive Conduit Rodders
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ELECTRIDUCT
Manufacturer Part Number
TL-BJT-CR12-1000W
Type
Round, Fiberglass, Reel Stand Case
N/mm Tensile Strength
15

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ELECTRIDUCT Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ELECTRIDUCT Cable Rodder adalah alat bantu penarikan kabel non-konduktif yang dirancang untuk instalasi saluran listrik dan data. Produk ini memiliki panjang 1.000 ft (kaki) dengan tipe bulat (round) dari bahan fiberglass yang kuat, dilengkapi dengan reel stand case untuk kemudahan penyimpanan dan penggunaan. Dengan kekuatan tarik 15 N/mm, Cable Rodder ini ideal untuk aplikasi penarikan kabel di dalam conduit atau saluran tertutup, memastikan keamanan dan efisiensi kerja di lapangan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi ELECTRIDUCT Cable Rodder?

ELECTRIDUCT Cable Rodder berfungsi sebagai alat bantu untuk menarik kabel listrik atau data melalui conduit atau saluran tertutup. Dengan panjang 1.000 ft dan bahan fiberglass non-konduktif, alat ini aman digunakan pada instalasi listrik dan memiliki kekuatan tarik 15 N/mm.

Apa spesifikasi ELECTRIDUCT Cable Rodder TL-BJT-CR12-1000W?

Spesifikasi produk ini meliputi tipe bulat (round) dari fiberglass, panjang 1.000 ft, kekuatan tarik 15 N/mm, dan dilengkapi reel stand case. Nomor part pabrikan adalah TL-BJT-CR12-1000W dari merek ELECTRIDUCT.

Di mana beli ELECTRIDUCT Cable Rodder di Indonesia?

Anda dapat membeli ELECTRIDUCT Cable Rodder TL-BJT-CR12-1000W melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Bagaimana cara memilih Cable Rodder yang tepat untuk instalasi kabel?

Pilih Cable Rodder dengan panjang yang sesuai dengan kebutuhan, seperti ELECTRIDUCT Cable Rodder 1.000 ft. Pastikan bahan non-konduktif (fiberglass) untuk keamanan listrik, dan perhatikan kekuatan tarik (15 N/mm) agar mampu menarik kabel tanpa putus.

Digunakan dalam

Aplikasi umum untuk ELECTRIDUCT
Construction sites — ELECTRIDUCT 3-channel rubber cable floor covers (MPN CC-RI-CP-15-TN) for temporary power cable routing across walkways.
Event venues — ELECTRIDUCT 5-channel hinged-cover cable ramps (MPN CP-RPS-LP-527-O/B) for protecting audio-visual cables in high-traffic areas.
Data centers — ELECTRIDUCT heat shrink breakout boots (MPN HSB-4-1.5-10PK) for sealing cable splices in cable trays.
Utility installations — ELECTRIDUCT non-conductive conduit rodders (MPN TL-BJT-CR06-500) for pulling cables through underground conduits.
Manufacturing facilities — ELECTRIDUCT 1-channel rubber cable covers (MPN D-2-LP-10-BN) for protecting control cables on factory floors.
Outdoor telecom — ELECTRIDUCT UV-resistant heat shrink end caps (MPN HSEC-100-UV-RD-25PK) for sealing cable ends in exposed environments.

ELECTRIDUCT Produk

3G Electric memasok ELECTRIDUCT non-conductive conduit rodders. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This hinged-cover cable ramp from ELECTRIDUCT provides two channels for routing cables and hoses across roadways, construction sites, and event venues. Constructed of rubber in a yellow/black color scheme, it measures 24 inches wide, 4 inches high, and 35 3/4 inches long, with a load capacity of 24,000 lb per axle. The hinged design allows easy access to cables while protecting them from heavy vehicle traffic
ELECTRIDUCT
This hinged-cover cable ramp from ELECTRIDUCT provides two channels for routing cables and hoses across roadways, construction sites, and event venues. Constructed of rubber in a yellow/black color scheme, it measures 24 inches wide, 4 inches high, and 35 3/4 inches long, with a load capacity of 24,000 lb per axle. The hinged design allows easy access to cables while protecting them from heavy vehicle traffic
ELECTRIDUCT
ELECTRIDUCT
ELECTRIDUCT Corrugated Loom Tubing: 3/8 in Nominal Size, 100 ft Overall Lg, Polypropylene, Black (MPN WL-PP-NS-0375-100-BK)
ELECTRIDUCT Cable Protector: 2 Channels, Hinged, 1 1/5 in Max Cable Dia, 10 in Wd, 1 7/8 in Ht (MPN CP-RPS-212-RT-YL)
ELECTRIDUCT
ELECTRIDUCT Cable Protector: 2 Channels, Hinged, 1 1/5 in Max Cable Dia, 10 in Wd, 1 7/8 in Ht (MPN CP-RPS-212-RT-YL)
ELECTRIDUCT
ELECTRIDUCT
Corrugated loom tubing for bundling and protecting wires and cables. Made of polypropylene, it is chemical resistant and self-extinguishing. Inside diameter 0.47 in, outside diameter 0.62 in, wall thickness 0.01 in. Supplied in 100 ft length
ELECTRIDUCT
ELECTRIDUCT
Polypropylene corrugated loom tubing with 0.75 in inside diameter, 0.92 in outside diameter, and 0.01 in wall thickness. Chemical resistant and self-extinguishing. Used to bundle and protect wires and cables in electrical installations. Supplied in 100 ft length

Lainnya dari ELECTRIDUCT

Lihat semua ELECTRIDUCT suku cadang →
Round fiberglass conduit rodder with 500 ft length and 15 N/mm tensile strength. Non-conductive construction for safety when pulling cables through conduit runs. Supplied with a Reel Stand case for storage and deployment
ELECTRIDUCT
Round fiberglass conduit rodder with 500 ft length and 15 N/mm tensile strength. Non-conductive construction for safety when pulling cables through conduit runs. Supplied with a Reel Stand case for storage and deployment
ELECTRIDUCT
ELECTRIDUCT
Non-conductive conduit rodder with 1000 ft length, round fiberglass construction, and 15 N/mm tensile strength. Includes reel stand case for storage and deployment. Used for pulling cables through conduit runs in electrical and telecommunications installations
This non-conductive conduit rodder is constructed of round fiberglass with a tensile strength of 15 N/mm. It is supplied in a Reel Stand case for organized deployment. Used for pulling cables through conduit runs in electrical and telecommunications installations
ELECTRIDUCT
This non-conductive conduit rodder is constructed of round fiberglass with a tensile strength of 15 N/mm. It is supplied in a Reel Stand case for organized deployment. Used for pulling cables through conduit runs in electrical and telecommunications installations
ELECTRIDUCT Cable Rodder: 750 ft Lg, Round, Reel Stand Case (MPN TL-BJT-CR12-7500W+TIP-KIT)
ELECTRIDUCT
ELECTRIDUCT Cable Rodder: 750 ft Lg, Round, Reel Stand Case (MPN TL-BJT-CR12-7500W+TIP-KIT)
ELECTRIDUCT Cable Rodder: 500 ft Lg, Round, Reel Stand Case (MPN TL-BJT-CR12-500W+TIP-KIT)
ELECTRIDUCT
ELECTRIDUCT Cable Rodder: 500 ft Lg, Round, Reel Stand Case (MPN TL-BJT-CR12-500W+TIP-KIT)
ELECTRIDUCT Cable Rodder: 300 ft Lg, 15 N/mm Tensile Strength, Round, Fiberglass, Reel Stand Case (MPN TL-BJT-CR06-300)
ELECTRIDUCT
ELECTRIDUCT Cable Rodder: 300 ft Lg, 15 N/mm Tensile Strength, Round, Fiberglass, Reel Stand Case (MPN TL-BJT-CR06-300)
ELECTRIDUCT Cable Rodder: 1,000 ft Lg, Round, Reel Stand Case (MPN TL-BJT-CR12-1000W+TIP-KIT)
ELECTRIDUCT
ELECTRIDUCT Cable Rodder: 1,000 ft Lg, Round, Reel Stand Case (MPN TL-BJT-CR12-1000W+TIP-KIT)