Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ELECTRIDUCT Non-Conductive Conduit Rodder - Non-Conductive Conduit Rodders
ELECTRIDUCTNon-Conductive Conduit Rodders

ELECTRIDUCT Non-Conductive Conduit Rodder

ELECTRIDUCT Cable Rodder adalah alat bantu penarikan kabel non-konduktif yang dirancang untuk instalasi saluran listrik dan data. Produk ini memiliki panjang 750 ft (sekitar 228,6 meter) dengan bentuk bulat (round)…

SKU 3G-OTH-407197

Juga terdaftar sebagai: TLBJTCR127500WTIPKIT · TL BJT CR12 7500W TIP KIT · TL-BJT-CR12-7500W-TIP-KIT

Merek
ELECTRIDUCT
Item
Non-Conductive Conduit Rodder
Kategori
Non-Conductive Conduit Rodders
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ELECTRIDUCT
Manufacturer Part Number
TL-BJT-CR12-7500W+TIP-KIT

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ELECTRIDUCT Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ELECTRIDUCT Cable Rodder adalah alat bantu penarikan kabel non-konduktif yang dirancang untuk instalasi saluran listrik dan data. Produk ini memiliki panjang 750 ft (sekitar 228,6 meter) dengan bentuk bulat (round) dan dilengkapi dengan reel stand case untuk penyimpanan dan pengoperasian yang praktis. Dengan nomor part TL-BJT-CR12-7500W+TIP-KIT, Cable Rodder ini merupakan solusi andal untuk teknisi dan kontraktor di Indonesia yang membutuhkan peralatan penarikan kabel yang aman dan efisien.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi ELECTRIDUCT Cable Rodder?

ELECTRIDUCT Cable Rodder berfungsi sebagai alat bantu untuk menarik kabel melalui saluran (conduit) atau jalur instalasi. Dengan panjang 750 ft dan desain non-konduktif, alat ini aman digunakan pada instalasi listrik dan data, serta memudahkan proses penarikan kabel tanpa risiko konduktivitas.

Apa spesifikasi ELECTRIDUCT Cable Rodder TL-BJT-CR12-7500W+TIP-KIT?

Spesifikasi produk ini meliputi panjang 750 ft, bentuk bulat (round), dan dilengkapi dengan reel stand case untuk penyimpanan. Produk ini memiliki nomor part TL-BJT-CR12-7500W+TIP-KIT dan termasuk dalam kategori Non-Conductive Conduit Rodders dari merek ELECTRIDUCT.

Di mana beli ELECTRIDUCT Cable Rodder di Indonesia?

Anda dapat membeli ELECTRIDUCT Cable Rodder melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih Cable Rodder yang tepat untuk instalasi?

Pemilihan Cable Rodder tergantung pada panjang dan jenis saluran yang akan dilalui. ELECTRIDUCT Cable Rodder dengan panjang 750 ft cocok untuk instalasi jarak jauh. Pastikan Anda mempertimbangkan diameter saluran dan kebutuhan aksesori seperti tip kit yang sudah termasuk dalam produk ini.

Digunakan dalam

Aplikasi umum untuk ELECTRIDUCT
Construction sites — ELECTRIDUCT 3-channel rubber cable floor covers (MPN CC-RI-CP-15-TN) for temporary power cable routing across walkways.
Event venues — ELECTRIDUCT 5-channel hinged-cover cable ramps (MPN CP-RPS-LP-527-O/B) for protecting audio-visual cables in high-traffic areas.
Data centers — ELECTRIDUCT heat shrink breakout boots (MPN HSB-4-1.5-10PK) for sealing cable splices in cable trays.
Utility installations — ELECTRIDUCT non-conductive conduit rodders (MPN TL-BJT-CR06-500) for pulling cables through underground conduits.
Manufacturing facilities — ELECTRIDUCT 1-channel rubber cable covers (MPN D-2-LP-10-BN) for protecting control cables on factory floors.
Outdoor telecom — ELECTRIDUCT UV-resistant heat shrink end caps (MPN HSEC-100-UV-RD-25PK) for sealing cable ends in exposed environments.

ELECTRIDUCT Produk

3G Electric memasok ELECTRIDUCT non-conductive conduit rodders. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This hinged-cover cable ramp from ELECTRIDUCT provides two channels for routing cables and hoses across roadways, construction sites, and event venues. Constructed of rubber in a yellow/black color scheme, it measures 24 inches wide, 4 inches high, and 35 3/4 inches long, with a load capacity of 24,000 lb per axle. The hinged design allows easy access to cables while protecting them from heavy vehicle traffic
ELECTRIDUCT
This hinged-cover cable ramp from ELECTRIDUCT provides two channels for routing cables and hoses across roadways, construction sites, and event venues. Constructed of rubber in a yellow/black color scheme, it measures 24 inches wide, 4 inches high, and 35 3/4 inches long, with a load capacity of 24,000 lb per axle. The hinged design allows easy access to cables while protecting them from heavy vehicle traffic
ELECTRIDUCT Cable Protector: 2 Channels, Hinged, 1 1/5 in Max Cable Dia, 10 in Wd, 1 7/8 in Ht (MPN CP-RPS-212-RT-YL)
ELECTRIDUCT
ELECTRIDUCT Cable Protector: 2 Channels, Hinged, 1 1/5 in Max Cable Dia, 10 in Wd, 1 7/8 in Ht (MPN CP-RPS-212-RT-YL)
ELECTRIDUCT
ELECTRIDUCT
Polypropylene corrugated loom tubing with 0.39 in inside diameter, 0.51 in outside diameter, and 0.01 in wall thickness. Self-extinguishing and chemical resistant. Used for bundling and protecting wires and cables in electrical enclosures, machinery, and automotive applications
Rubber straight-section cable ramp with five hinged channels for routing and protecting cables and hoses from vehicle traffic. Black/yellow color for visibility. Accepts cables up to 1 3/8 in diameter. Width 23 1/2 in, height 3 in
ELECTRIDUCT
Rubber straight-section cable ramp with five hinged channels for routing and protecting cables and hoses from vehicle traffic. Black/yellow color for visibility. Accepts cables up to 1 3/8 in diameter. Width 23 1/2 in, height 3 in
This fish tape repair kit includes a fiberglass component, a rolling guide, and a braking system. It is used to replace worn or damaged tips on compatible fish tape reels in electrical and cabling applications
ELECTRIDUCT
This fish tape repair kit includes a fiberglass component, a rolling guide, and a braking system. It is used to replace worn or damaged tips on compatible fish tape reels in electrical and cabling applications

Lainnya dari ELECTRIDUCT

Lihat semua ELECTRIDUCT suku cadang →
This non-conductive conduit rodder features a 500 ft length and round profile, supplied with a Reel Stand Case and tip kit. It is used for pulling cables through conduit systems in industrial, commercial, and utility installations, enabling safe and efficient routing of wiring in tight or long conduit runs
ELECTRIDUCT
This non-conductive conduit rodder features a 500 ft length and round profile, supplied with a Reel Stand Case and tip kit. It is used for pulling cables through conduit systems in industrial, commercial, and utility installations, enabling safe and efficient routing of wiring in tight or long conduit runs
This non-conductive conduit rodder is constructed of round fiberglass with a tensile strength of 15 N/mm. It is supplied in a 300 ft length and includes a Reel Stand case for storage and deployment. Used for pulling cables through conduit runs in electrical and telecom installations
ELECTRIDUCT
This non-conductive conduit rodder is constructed of round fiberglass with a tensile strength of 15 N/mm. It is supplied in a 300 ft length and includes a Reel Stand case for storage and deployment. Used for pulling cables through conduit runs in electrical and telecom installations
Non-conductive conduit rodder with 1,000 ft length and round profile, supplied in a Reel Stand case. Includes a tip kit for attaching pulling accessories. Used for pulling cables through conduit in electrical, telecom, and industrial installations
ELECTRIDUCT
Non-conductive conduit rodder with 1,000 ft length and round profile, supplied in a Reel Stand case. Includes a tip kit for attaching pulling accessories. Used for pulling cables through conduit in electrical, telecom, and industrial installations
Round fiberglass conduit rodder with 500 ft length and 15 N/mm tensile strength. Non-conductive construction for safety when pulling cables through conduit runs. Supplied with a Reel Stand case for storage and deployment
ELECTRIDUCT
Round fiberglass conduit rodder with 500 ft length and 15 N/mm tensile strength. Non-conductive construction for safety when pulling cables through conduit runs. Supplied with a Reel Stand case for storage and deployment
ELECTRIDUCT
ELECTRIDUCT
Non-conductive conduit rodder with 1000 ft length, round fiberglass construction, and 15 N/mm tensile strength. Includes reel stand case for storage and deployment. Used for pulling cables through conduit runs in electrical and telecommunications installations
This non-conductive conduit rodder is designed for pulling cables through conduit runs in electrical, telecom, and industrial installations. It features a 1000 ft length, 15 N/mm tensile strength, and round fiberglass construction. The rodder comes with a reel stand case for convenient storage and deployment
ELECTRIDUCT
This non-conductive conduit rodder is designed for pulling cables through conduit runs in electrical, telecom, and industrial installations. It features a 1000 ft length, 15 N/mm tensile strength, and round fiberglass construction. The rodder comes with a reel stand case for convenient storage and deployment
This non-conductive conduit rodder is constructed of round fiberglass with a tensile strength of 15 N/mm. It is supplied in a Reel Stand case for organized deployment. Used for pulling cables through conduit runs in electrical and telecommunications installations
ELECTRIDUCT
This non-conductive conduit rodder is constructed of round fiberglass with a tensile strength of 15 N/mm. It is supplied in a Reel Stand case for organized deployment. Used for pulling cables through conduit runs in electrical and telecommunications installations