ENERPAC Punch and Die Set: 3/4 in Bolt Size (In.), 0.5 Cold Rolled C-1018
The ENERPAC Punch and Die Set (MPN SPD813) is a hand and power tool designed for 3/4 in bolt size applications. It accommodates 0.5 in cold rolled C-1018 material and 0.5 in boilerplate, enabling precise punching…
SKU 3G-OTH-302164
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ENERPAC Punch and Die Set (MPN SPD813) is a hand and power tool designed for 3/4 in bolt size applications. It accommodates 0.5 in cold rolled C-1018 material and 0.5 in boilerplate, enabling precise punching operations.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ENERPAC SPD813 punch and die set used for?
The ENERPAC SPD813 punch and die set is used for creating clean holes in steel plates up to 0.5 in thick, including cold rolled C-1018 and boilerplate. It is designed for industrial maintenance, fabrication, and structural steel work where precise, burr-free holes are required.
What are the specifications of the ENERPAC SPD813 punch and die set?
The ENERPAC SPD813 punch and die set accommodates a 3/4 in bolt size and punches through materials up to 0.5 in thick, including cold rolled C-1018 and boilerplate. The manufacturer part number is SPD813. It is a hand-operated tool set for industrial hole punching applications.
Where to buy the ENERPAC SPD813 punch and die set worldwide?
3G Electric supplies the ENERPAC SPD813 punch and die set worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this genuine ENERPAC tool set.
How to select the right ENERPAC punch and die set for my material?
To select the right ENERPAC punch and die set, match the bolt size and material thickness to the set's capacity. The SPD813 works for 3/4 in bolts and materials up to 0.5 in thick, such as cold rolled C-1018 or boilerplate. Always verify material hardness and hole diameter requirements before ordering.
Digunakan dalam
Aplikasi umum untuk ENERPACENERPAC Produk
3G Electric memasok ENERPAC hand and power tools. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
