ERMETO Compression Fitting Adapter: 18 mm OD Size, 1/2-14 Thread Size, NPTF
The ERMETO Compression Fitting Adapter (MPN GE18L1/2NPTCFX) is a flareless bite-type steel compression fitting with an 18 mm OD size and a 1/2-14 NPTF thread. Part of the Ermeto DIN series, this steel adapter is…
SKU 3G-OTH-470261
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ERMETO Compression Fitting Adapter (MPN GE18L1/2NPTCFX) is a flareless bite-type steel compression fitting with an 18 mm OD size and a 1/2-14 NPTF thread. Part of the Ermeto DIN series, this steel adapter is designed for industrial fluid systems requiring secure, leak-resistant connections.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ERMETO Compression Fitting Adapter used for?
The ERMETO Compression Fitting Adapter is used in industrial fluid systems to create secure, leak-resistant connections between tubes and ports. It is commonly applied in hydraulic, pneumatic, and lubrication circuits where reliable sealing under pressure is required.
What are the specifications of the ERMETO GE18L1/2NPTCFX?
The ERMETO GE18L1/2NPTCFX is a flareless bite-type steel compression fitting adapter. It has an 18 mm OD tube size and a 1/2-14 NPTF thread. It is part of the Ermeto DIN series and is made of steel for durability in demanding fluid systems.
Where to buy ERMETO compression fittings in worldwide?
3G Electric supplies ERMETO compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the GE18L1/2NPTCFX or other Ermeto DIN series adapters for your fluid system needs.
How to install an ERMETO flareless bite-type compression fitting?
To install an ERMETO flareless bite-type fitting, cut the tube square, deburr, and insert it fully into the fitting. Tighten the nut by hand, then use a wrench to turn it the specified number of flats per the manufacturer's instructions. This creates a bite ring seal for a leak-resistant joint.
ERMETO Produk
3G Electric memasok ERMETO flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
