Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ESAB Stoody 101HC Hardfacing Flux-Cored Wire, 0.045 in, 33 lb, DCEP, 64 HRC - Hardfacing Alloys for Abrasion & Impact
ESABHardfacing Alloys for Abrasion & Impact

ESAB Stoody 101HC Hardfacing Flux-Cored Wire, 0.045 in, 33 lb, DCEP, 64 HRC

ESAB Stoody 101HC adalah kawat las inti fluks (flux-cored wire) untuk hardfacing yang dirancang khusus menahan abrasi dan impact berat. Dengan kekerasan mencapai 64 HRC dalam kondisi as-welded, kawat ini sangat cocok…

SKU 3G-OTH-364269

Merek
ESAB
Item
Stoody 101HC Hardfacing Flux-Cored Wire, 0.045 in, 33 lb, DCEP, 64 HRC
Kategori
Hardfacing Alloys for Abrasion & Impact
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ESAB
Manufacturer Part Number
11436300
Series
Stoody 101HC
Maximum Rockwell Hardness (As Welded)
64 HRC

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ESAB Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ESAB Stoody 101HC adalah kawat las inti fluks (flux-cored wire) untuk hardfacing yang dirancang khusus menahan abrasi dan impact berat. Dengan kekerasan mencapai 64 HRC dalam kondisi as-welded, kawat ini sangat cocok untuk aplikasi pelapisan keras pada komponen yang mengalami keausan tinggi. Tersedia dalam diameter 0,045 inci dan berat 33 lb per gulungan, serta menggunakan polaritas DCEP. Produk ini merupakan solusi andal untuk perbaikan dan perlindungan permukaan logam di lingkungan industri berat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ESAB Stoody 101HC?

ESAB Stoody 101HC adalah kawat las inti fluks untuk hardfacing dengan kekerasan maksimum 64 HRC dalam kondisi as-welded. Diameter kawat 0,045 inci, berat 33 lb per gulungan, dan menggunakan polaritas DCEP. Produk ini dirancang untuk aplikasi abrasi dan impact.

Untuk apa ESAB Stoody 101HC digunakan?

ESAB Stoody 101HC digunakan untuk hardfacing atau pelapisan keras pada komponen yang mengalami keausan akibat abrasi dan impact, seperti bucket excavator, pisau crusher, dan suku cadang alat berat lainnya. Kekerasan 64 HRC memberikan ketahanan aus yang sangat tinggi.

Di mana beli ESAB Stoody 101HC di Indonesia?

Anda dapat membeli ESAB Stoody 101HC melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan sehingga Anda dapat fokus pada operasional. Hubungi kami untuk minta penawaran.

Apa perbedaan Stoody 101HC dengan kawat hardfacing lain?

ESAB Stoody 101HC menawarkan kekerasan 64 HRC dalam kondisi as-welded tanpa perlu perlakuan panas tambahan. Ini memberikan ketahanan aus optimal untuk aplikasi abrasi dan impact. Diameter 0,045 inci dan berat 33 lb memudahkan penanganan di bengkel las.

Digunakan dalam

Aplikasi umum untuk ESAB
Pipeline welding — ESAB Sureweld 710P (E7010-P1) stick electrodes for root and fill passes on carbon steel pipes.
Hardfacing of mining equipment — ESAB Stoody 968-G flux-cored wire for rebuilding crusher rolls and shovel teeth.
Stainless steel fabrication — ESAB Sureweld 308L-16 electrodes for welding 304L stainless steel tanks and piping.
Structural steel construction — ESAB Sureweld 810P (E8010-P1) electrodes for high-strength steel beam connections.
Plasma cutting of sheet metal — ESAB HandyPlasma 60A torch with 35 A tip for handheld cutting of mild steel up to 1/2 in.
Repair of conveyor components — ESAB Stoody 101HC wire for hardfacing screw conveyors and chute liners.

ESAB Produk

3G Electric memasok ESAB hardfacing alloys for abrasion & impact. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Flux-cored hardfacing wire for severe abrasion and moderate impact applications. Used to rebuild and protect equipment surfaces exposed to mineral, earth, and slurry wear. Suitable for welding onto carbon steel substrates in heavy-wear environments
ESAB
Flux-cored hardfacing wire for severe abrasion and moderate impact applications. Used to rebuild and protect equipment surfaces exposed to mineral, earth, and slurry wear. Suitable for welding onto carbon steel substrates in heavy-wear environments
ESAB Stoody 110-G is a build-up alloy flux-cored wire for hardfacing applications. It provides a maximum as-welded Rockwell hardness of 55 HRC. This 0.045 in diameter wire is supplied on a 33 lb spool and requires DCEP polarity. Used to restore worn metal parts and apply wear-resistant overlays in heavy equipment maintenance
ESAB
ESAB Stoody 110-G is a build-up alloy flux-cored wire for hardfacing applications. It provides a maximum as-welded Rockwell hardness of 55 HRC. This 0.045 in diameter wire is supplied on a 33 lb spool and requires DCEP polarity. Used to restore worn metal parts and apply wear-resistant overlays in heavy equipment maintenance
ESAB Dual Shield 710X flux-cored wire, classified E71T-9C, in 1/16 in diameter on a 33 lb spool. As welded, it provides tensile strength of 87 ksi to 93 ksi and yield strength of 75 ksi to 83 ksi. Suitable for general steel fabrication, including structural welding and heavy equipment repair
ESAB
ESAB Dual Shield 710X flux-cored wire, classified E71T-9C, in 1/16 in diameter on a 33 lb spool. As welded, it provides tensile strength of 87 ksi to 93 ksi and yield strength of 75 ksi to 83 ksi. Suitable for general steel fabrication, including structural welding and heavy equipment repair
ESAB Coreshield 15 is a flux-cored wire classified as E71T-GS, with a diameter of 0.03 in and supplied on a 10 lb spool. As welded, it provides a tensile strength of 89 ksi and a yield strength of 89 ksi. This wire is intended for welding thin-gauge sheet metal in applications such as light fabrication and general maintenance
ESAB
ESAB Coreshield 15 is a flux-cored wire classified as E71T-GS, with a diameter of 0.03 in and supplied on a 10 lb spool. As welded, it provides a tensile strength of 89 ksi and a yield strength of 89 ksi. This wire is intended for welding thin-gauge sheet metal in applications such as light fabrication and general maintenance
Hardfacing flux-cored wire for severe abrasion and moderate impact applications. Deposits a high-chrome carbide overlay with a hardness of 61 HRC. Suitable for rebuilding and protecting equipment subject to wear, such as bucket teeth, crushers, and augers. Diameter: 0.045 in, weight: 33 lb, polarity: DCEN
WESTWARD
Hardfacing flux-cored wire for severe abrasion and moderate impact applications. Deposits a high-chrome carbide overlay with a hardness of 61 HRC. Suitable for rebuilding and protecting equipment subject to wear, such as bucket teeth, crushers, and augers. Diameter: 0.045 in, weight: 33 lb, polarity: DCEN
LINCOLN ELECTRIC
LINCOLN ELECTRIC
This hardfacing flux-cored wire is designed for severe impact and abrasion applications. It is commonly used for rebuilding and protecting rail components such as tracks, crossing frogs, and switch points. The wire is supplied on a 25 lb spool with a 5/64 in diameter and requires DCEP polarity

Lainnya dari ESAB

Lihat semua ESAB suku cadang →
ESAB Stoody 31 is a hardfacing stick electrode for applications requiring resistance to both abrasion and impact. It deposits a weld overlay with a maximum hardness of 49 HRC as welded. This electrode is used for rebuilding and protecting heavy equipment components such as crushers, bucket teeth, and mixer blades
ESAB
ESAB Stoody 31 is a hardfacing stick electrode for applications requiring resistance to both abrasion and impact. It deposits a weld overlay with a maximum hardness of 49 HRC as welded. This electrode is used for rebuilding and protecting heavy equipment components such as crushers, bucket teeth, and mixer blades
Hardfacing stick electrode for abrasion and impact applications. Deposits a wear-resistant layer on carbon steel parts. Maximum Rockwell hardness as welded is 46 HRC. Suitable for bucket teeth, crusher rolls, and mixer blades
ESAB
Hardfacing stick electrode for abrasion and impact applications. Deposits a wear-resistant layer on carbon steel parts. Maximum Rockwell hardness as welded is 46 HRC. Suitable for bucket teeth, crusher rolls, and mixer blades
ESAB Stoody 968-G is a flux-cored hardfacing wire for abrasion and impact applications. It deposits weld metal with a maximum Rockwell hardness of 69 HRC as welded. The 0.045 in diameter wire is supplied on a 33 lb spool and operates on DCEP polarity. Typical uses include rebuilding and protecting heavy-wear parts subject to severe abrasion and impact
ESAB
ESAB Stoody 968-G is a flux-cored hardfacing wire for abrasion and impact applications. It deposits weld metal with a maximum Rockwell hardness of 69 HRC as welded. The 0.045 in diameter wire is supplied on a 33 lb spool and operates on DCEP polarity. Typical uses include rebuilding and protecting heavy-wear parts subject to severe abrasion and impact
Flux-cored wire for hardfacing applications requiring abrasion resistance and moderate impact toughness. Deposits a high-chromium carbide overlay. As-welded maximum Rockwell hardness of 64 HRC. Suitable for wear protection on equipment such as crushers, conveyors, and earthmoving tools
ESAB
Flux-cored wire for hardfacing applications requiring abrasion resistance and moderate impact toughness. Deposits a high-chromium carbide overlay. As-welded maximum Rockwell hardness of 64 HRC. Suitable for wear protection on equipment such as crushers, conveyors, and earthmoving tools
ESAB Stoody 33 is a hardfacing stick electrode for applications requiring resistance to abrasion and impact. It deposits a weld overlay with a maximum Rockwell hardness of 46 HRC as welded. The electrode measures 3/16 in diameter by 14 in length and is packaged in a 10 lb container. Suitable for rebuilding and protecting heavy equipment parts
ESAB
ESAB Stoody 33 is a hardfacing stick electrode for applications requiring resistance to abrasion and impact. It deposits a weld overlay with a maximum Rockwell hardness of 46 HRC as welded. The electrode measures 3/16 in diameter by 14 in length and is packaged in a 10 lb container. Suitable for rebuilding and protecting heavy equipment parts
ESAB Stoody 31 is a hardfacing stick electrode for abrasion and impact applications. It provides a maximum Rockwell hardness of 49 HRC as welded. Typical uses include rebuilding and protecting carbon steel components subject to wear, such as crusher rolls, bucket teeth, and conveyor screws. Supplied in a 10 lb package, electrode diameter 1/8 in, length 14 in
ESAB
ESAB Stoody 31 is a hardfacing stick electrode for abrasion and impact applications. It provides a maximum Rockwell hardness of 49 HRC as welded. Typical uses include rebuilding and protecting carbon steel components subject to wear, such as crusher rolls, bucket teeth, and conveyor screws. Supplied in a 10 lb package, electrode diameter 1/8 in, length 14 in
Hardfacing stick electrode for applications requiring abrasion resistance and impact toughness. Delivers a maximum Rockwell hardness of 57 HRC as welded. Commonly used to rebuild and protect heavy equipment components such as crusher rolls, bucket teeth, and conveyor screws
ESAB
Hardfacing stick electrode for applications requiring abrasion resistance and impact toughness. Delivers a maximum Rockwell hardness of 57 HRC as welded. Commonly used to rebuild and protect heavy equipment components such as crusher rolls, bucket teeth, and conveyor screws
Hardfacing stick electrode for abrasion and impact applications. Delivers a maximum Rockwell hardness of 57 HRC as welded. Supplied in a 10 lb package with dimensions 3/16 in x 14 in. Used for rebuilding and protecting heavy equipment components subject to wear
ESAB
Hardfacing stick electrode for abrasion and impact applications. Delivers a maximum Rockwell hardness of 57 HRC as welded. Supplied in a 10 lb package with dimensions 3/16 in x 14 in. Used for rebuilding and protecting heavy equipment components subject to wear