EUCHNER Flying Lead Connector: M12 Male Straight X Bare Wire, 5 Pins, Black, PVC
The EUCHNER Flying Lead Connector is a single-ended cordset with a PVC jacket for flexing applications, featuring an M12 male straight connector on one end and bare wire on the other. This 5-pin, 10-meter cable is…
SKU 3G-OTH-51640
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The EUCHNER Flying Lead Connector is a single-ended cordset with a PVC jacket for flexing applications, featuring an M12 male straight connector on one end and bare wire on the other. This 5-pin, 10-meter cable is rated IP67 and has a black PVC jacket. It is designed for industrial connectivity where a durable, flexible cable connection is required.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the EUCHNER M12 flying lead connector used for?
This EUCHNER single-ended cordset connects sensors or actuators to control systems in industrial automation. Its M12 male straight connector and bare wire end suit flexing applications where a durable, IP67-rated PVC cable is required for reliable signal or power transmission.
What are the specifications of the EUCHNER C-M12F05-05X034PV10,0-MA-100184?
This EUCHNER flying lead connector has 5 pins, a 10 m cable length, M12 male straight connector on one end and bare wire on the other. It features a black PVC jacket, IP67 rating, and is designed for flexing applications in industrial environments.
Where to buy EUCHNER M12 connectors worldwide?
3G Electric supplies EUCHNER M12 flying lead connectors worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this IP67-rated cordset to your facility. Contact us for pricing and lead time.
How to install the EUCHNER M12 flying lead connector?
Install by connecting the M12 male straight plug to a compatible sensor or actuator port. Strip the bare wire ends to the recommended length and terminate into a terminal block or controller. Ensure the IP67 seal is intact and cable is routed without sharp bends.
Digunakan dalam
Aplikasi umum untuk EUCHNEREUCHNER Produk
3G Electric memasok EUCHNER single-ended cordsets with pvc jacket for flexing applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









