FASTPIPE Compression Fitting Elbow: 1 in Pipe x 1/4 in Pipe Size
The FASTPIPE Compression Fitting Elbow (MPN F2073) is a compressed air system nylon compression fitting with a 1 in Pipe x 1/4 in Pipe Size, FNPT type. This elbow fitting is designed for connecting and routing…
SKU 3G-OTH-491161
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FASTPIPE Compression Fitting Elbow (MPN F2073) is a compressed air system nylon compression fitting with a 1 in Pipe x 1/4 in Pipe Size, FNPT type. This elbow fitting is designed for connecting and routing compressed air lines in industrial pneumatic systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FASTPIPE Compression Fitting Elbow used for?
The FASTPIPE Compression Fitting Elbow (MPN F2073) is used to connect and route compressed air lines in industrial pneumatic systems. Its 1 in Pipe x 1/4 in Pipe Size FNPT design allows for directional changes in nylon piping, supporting efficient air distribution across manufacturing and automation facilities.
What are the specifications of the FASTPIPE F2073 elbow?
The FASTPIPE F2073 is a nylon compression fitting elbow with a 1 in Pipe x 1/4 in Pipe Size and FNPT connection type. It is designed for compressed air systems and is manufactured by FASTPIPE. The part number is F2073, and it is suitable for industrial pneumatic line routing.
Where to buy FASTPIPE F2073 compression fitting worldwide?
3G Electric supplies the FASTPIPE F2073 compression fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source this part for your pneumatic system needs.
How to install a FASTPIPE nylon compression elbow?
To install the FASTPIPE nylon compression elbow, cut the pipe square, deburr the end, and fully insert it into the fitting. Tighten the nut by hand until snug, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage to the nylon components.
FASTPIPE Produk
3G Electric memasok FASTPIPE compressed air system nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
