FENNER DRIVES Keyless Bushing: For 2 in Shaft Dia, 2 7/8 in OD, 3.563 in Wd
The FENNER DRIVES Keyless Bushing is a single-nut locking assembly keyless bushing designed for a 2-inch shaft diameter. It features a 2 7/8-inch outer diameter and 3.563-inch width, constructed from oil-dipped…
SKU 3G-OTH-111576
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FENNER DRIVES Keyless Bushing is a single-nut locking assembly keyless bushing designed for a 2-inch shaft diameter. It features a 2 7/8-inch outer diameter and 3.563-inch width, constructed from oil-dipped steel. This inch-system bushing has no flange and is identified by manufacturer part number 6202560UP.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a FENNER DRIVES keyless bushing used for?
A FENNER DRIVES keyless bushing mounts components like pulleys or sprockets onto a shaft without keys or set screws. It uses a single-nut locking assembly to create a tight, concentric fit, commonly applied in power transmission systems for conveyors, pumps, and industrial machinery.
What are the specifications of the FENNER DRIVES keyless bushing 6202560UP?
This FENNER DRIVES keyless bushing is a single-nut locking assembly for a 2-inch shaft diameter. It has a 2 7/8-inch outer diameter, 3.563-inch width, and is made from oil-dipped steel. It uses inch measurements, has no flange, and carries MPN 6202560UP.
Where to buy FENNER DRIVES keyless bushings worldwide?
You can source FENNER DRIVES keyless bushings through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead times on this bushing or other FENNER DRIVES components.
How to install a FENNER DRIVES single-nut keyless bushing?
To install a FENNER DRIVES single-nut keyless bushing, clean the shaft and bore, slide the bushing onto the shaft, position the component, then tighten the single locking nut to the manufacturer's torque specification. This creates a friction lock without keys. Always follow FENNER DRIVES installation guidelines for proper fit.
Digunakan dalam
Aplikasi umum untuk FENNER DRIVESFENNER DRIVES Produk
3G Electric memasok FENNER DRIVES single-nut locking assembly keyless bushings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
