FENNER DRIVES Keyless Bushing: For 45 mm Shaft Dia, 75 mm OD, 24 mm Wd
The FENNER DRIVES Keyless Bushing is a metric multi-screw locking assembly keyless bushing designed for a 45 mm shaft diameter. It features a 75 mm outer diameter, 24 mm width, and M8 x 22 screw thread size, with no…
SKU 3G-OTH-117315
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FENNER DRIVES Keyless Bushing is a metric multi-screw locking assembly keyless bushing designed for a 45 mm shaft diameter. It features a 75 mm outer diameter, 24 mm width, and M8 x 22 screw thread size, with no flange type. This component is identified by manufacturer part number B401045.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a FENNER DRIVES keyless bushing used for?
A FENNER DRIVES keyless bushing mounts components like pulleys or sprockets onto a shaft without a keyway. It uses multi-screw locking to transmit torque reliably. Common in industrial power transmission, conveyors, and machinery where precise shaft alignment and easy repositioning are needed.
What are the specifications of the FENNER DRIVES keyless bushing B401045?
The FENNER DRIVES keyless bushing B401045 is a metric multi-screw locking assembly for a 45 mm shaft diameter. It has a 75 mm outer diameter, 24 mm width, and M8 x 22 screw thread size. It has no flange type and is designed for keyless shaft mounting.
Where to buy FENNER DRIVES keyless bushings worldwide?
You can source FENNER DRIVES keyless bushings worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the B401045 or other models.
How to install a FENNER DRIVES keyless bushing?
To install a FENNER DRIVES keyless bushing, clean the shaft and bore surfaces, then slide the bushing onto the shaft. Tighten the M8 x 22 screws evenly in a crisscross pattern to the manufacturer's recommended torque. This creates a friction lock without damaging the shaft. Always follow FENNER DRIVES installation guidelines.
Digunakan dalam
Aplikasi umum untuk FENNER DRIVESFENNER DRIVES Produk
3G Electric memasok FENNER DRIVES multi-screw locking assembly keyless bushings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
