FIELD CONTROLS 19-21"dia SS Barometric Draft Control: Natural Gas and Oil
The FIELD CONTROLS 19-21"dia SS Barometric Draft Control is a barometric draft control damper designed for natural gas and oil fuels. It features a press-fit connection and is compatible with 19-inch, 20-inch, and…
SKU 3G-OTH-75631
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FIELD CONTROLS 19-21"dia SS Barometric Draft Control is a barometric draft control damper designed for natural gas and oil fuels. It features a press-fit connection and is compatible with 19-inch, 20-inch, and 21-inch duct diameters (MPN 20"M+MG2). This product is constructed with stainless steel.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FIELD CONTROLS 19-21"dia SS Barometric Draft Control used for?
This barometric draft control damper regulates chimney draft in natural gas and oil heating systems. It maintains consistent negative pressure for safe, efficient combustion. FIELD CONTROLS designs this stainless steel unit for press-fit installation on 19-inch, 20-inch, or 21-inch duct diameters.
What are the specifications of the FIELD CONTROLS 20"M+MG2 barometric draft control?
The FIELD CONTROLS 20"M+MG2 is a stainless steel barometric draft control for natural gas and oil fuels. It fits 19-inch, 20-inch, and 21-inch duct diameters with a press-fit connection. The manufacturer part number is 20"M+MG2.
Where to buy the FIELD CONTROLS 20"M+MG2 barometric draft control worldwide?
3G Electric supplies the FIELD CONTROLS 20"M+MG2 barometric draft control to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this stainless steel draft control for natural gas and oil systems.
How to install a FIELD CONTROLS barometric draft control?
Install the FIELD CONTROLS barometric draft control by cutting a hole in the vent pipe at the correct height, then pressing the unit into place. Ensure the damper swings freely and is level. Always follow local codes and the manufacturer's instructions for safe operation with natural gas or oil.
Digunakan dalam
Aplikasi umum untuk FIELD CONTROLSFIELD CONTROLS Produk
3G Electric memasok FIELD CONTROLS barometric draft control dampers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
