Fireye 25SU3 Flame Signal Amplifier

[{"filename":"CU-37-25SU3-2100_19inch_Adapter_English_2013-04-15.pdf","text":"SPECIFICATION DATA\n 19\" ADAPTER FOR 25SU3-2100 AMPLIFIER\n 192SU3-2120 120 VAC\n 192SU3-2220 220 VAC\n\nFEATURES\n• Easy Upgrade. The new 19\" Adapter gives opera-\n tors the ability to easily field convert existing\n 25SU3 type controls to the new 25SU3-2100 am-\n plifier.\n• Plug-In Convenience. The 19\" Adapter with the\n 25SU3-2100 Amplifier simply plugs into existing\n 60-1706 racks.\n• Application Flexibility. Both high and low volt-\n age Fireye scanners - 45UV5, 45RM1, 45RM2,\n 45RM4, and 45FS1 - are compatible with the\n new 19\" Adapter and 25SU3-2100 Amplifier.\n• Electrical and Mechanical Compatibility. Since\n the 19\" Adapter is electrically (“pin for pin”) and\n mechanically compatible with the existing wiring\n in the 60-1706 rack, in most applications, no elec-\n trical or mechanical changes are required to the The 19\" Adapter has a front panel (Figure 2)\n existing installed enclosure. with the same physical dimensions as an existing\n• Two Adapters are Available. A 120V version 25SU3-4170 type amplifier, and an aluminum han-\n (192SU3-2120) and a 220V version (192SU3- dle facilitating either inserting or removing the\n 2220) are available, each one providing power to adapter from the 60-1706 rack.\n the 25SU3-2100 from either a 120 VAC or 220 The following table lists the present control one\n VAC source. may have and the appropriate adapter model that is\n required to update that control to the new 19\" Ampli-\nDESCRIPTION fier (25SU3-2100).\n The Fireye 19 inch adapter (Figure 1) gives oper-\nators the ability to easily upgrade existing 25SU3 type\ncontrols to the new Fireye 19 Inch 25SU3-2100\n 25SU3 CONTROL TO BE ADAPTER MODEL REQUIRED\namplifier. Two types of adapters are available: REPLACED TO UPDATE TO 25SU3-2100\n192SU3-2120 (120V version) and 192SU3-2220\n(220V version), each one providing power to the 25SU3-4163 192SU3-2120\n25SU3-2100 from either a 120 VAC or a 220 VAC 25SU3-4167 192SU3-2120\nsource. Using the new adapter, the 19\" 25SU3-2100\n 25SU3-4170 192SU3-2120\namplifier is compatible with the following FIREYE\nscanners: 45UV5, 45RM1, 45RM2, 45RM4 and 25SU3-4171 192SU3-2220\n45FS1. 25SU3-4172 192SU3-2120\n Since the adapter is electrically (“pin for pin”) 25SU3-5172 192SU3-2120\nand mechanically compatible with the existing wiring\nin the 60-1706 rack, in most applications, electrical 25SU3-5173 192SU3-2220\nand mechanical changes are not required. An Added\nPlus to upgrading to the new 19\" 25SU3-2100 ampli-\nfier with the 19\" adapter is that it does not require any\nchanges to the existing installed enclosure.\n\n\n\n\n CU-37\n APRIL 15, 2013\n\fSPECIFICATIONS DIMENSIONS\nELECTRICAL Height: 6.06 inches (15.4 cm)\n The Electrical supply to the system is 120 VAC Width: 2.91 inches (7.4 cm)\n(+10%,-15%) for the 192SU3-2120 and 220 VAC\n Depth: 8.18 inches (20.8 cm)\n(+10%,-15%) for the 192SU3-2220. Line frequency\nfor either model is 50/60 Hz. Weight: 1.47 lb. (669 grams)\n\nENVIRONMENTAL\nStorage Temperature:\n HOW TO ORDER\n Minimum: -20 C\n Maximum: +80 C To Order a 120 VAC adapter:\nOperating Temperature: Specify Part Number 192SU3-2120.\n Minimum: -20 C To Order a 220 VAC adapter:\n Maximum: +60 C Specify Part Number 192SU3-2220.\nHumidity:\n Maximum 85% RH\n (Relative Humidity) Non condensing\n\n\n\n\n USE THE ADAPTER HANDLE (NOT\n THE AMPLIFIER HANDLE) TO\n REMOVE THE ADAPTER/AMPLIFIER\n ASSEMBLY FROM THE WIRING RACK\n\n\n\n\n FIREYE CU-37\n 3 Manchester Road APRIL 15, 2013\n Derry, New Hampshire 03038 USA Supersedes January 5, 2006\n www.fireye.com"}]